Ixon Torque, leather jacket waterproof women

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Uvex HLMT 5 Pure SkihelmClean. Ehrlich. PUR. Der uvex hlmt 5 pure ist der ultimative Champagne Powder rockende Freeride Skihelm, der dein Big Mountain Equipment um einen cleanen Street Style ergänzt. Es geht kein Weg an diesem Meisterstück vorbei. Purer Style und hochwertige Verarbeitung. Ein Style, der jedem Kopf passt. Der uvex hlmt 5 pure Skihelm verbindet hochwertige Funktionen mit purem authentischem Look. Kein Kompromiss - pure Performance. Bei dem uvex hlmt 5 pure Skihelm kann mit Hilfe der IAS 3D-Größenverstellung mit einem kleinen Rad an der Rückseite optimal die richtige Größe eingestellt werden. Mit abnehmbaren Earpads, dem Monomatic Verschluss und variabler Polsterung kann der Skihelm uvex hlmt 5 pure jedem Style angepasst werden. Egal ob du auf oder neben der Piste unterwegs bist. Big Mountain Schutz made by uvex.EigenschaftenHartschalen Technologie: Der Helm besteht aus einer gespritzten Außenschale und der EPS Innenschale. Eine hochwirksame Sicherheits-Kombination: Außen schlagfest, innen stoßabsorbierend und kälteisolierend. Austauschbare Innenausstattung: uvex Innenausstattungen sind feuchtigkeitsabsorbierend, antiallergisch und zum Waschen. Dank Klettverschluss leicht herausnehmbar. Kopfbandhalter: uvex Skihelme bieten auch im Detail mehr Komfort: Die integrierte Kopfbandhalterung fixiert die Skibrille in jeder Situation sicher am Helm. Austauschbare Ohrenpolster: Besser hören erhöht die Sicherheit signifikant. Für die unverfälschte Wiedergabe von Umgebungsgeräuschen haben wir daher eine Spezialmembran entwickelt. Die Ohrpads haben wir zudem zugfrei mit maximalem Tragekomfort designed. Verschließbares Belüftungssystem: Das uvex closable vent system kann mehr: geöffnet sorgt es bei Wärme für optimale Kühlung. Geschlossen hält es den Kopf warm und trocken. Monomatic Verschluss: Mehrstufig und anatomisch geformt: Der Komfortverschluss uvex Monomatic lässt sich mit nur einer Hand auf Knopfdruck öffnen und schließen. So sitzt das Kinnband immer perfekt. IAS: Gleicher Kopfumfang heißt noch lange nicht, dass der Helm auch auf jedem Kopf für maximale Sicherheit und Komfort sorgt. Fortschrittliche Fit-Systeme sorgen in jeder Richtung für perfekte Anpassung an die individuelle Kopfform. Millimetergenau und im Handumdrehen. Anti Allergisches Helmfutter Norm: EN 1077 B 3 Schalengrößen Gewicht: ab 470 g

Features:-Super bright flashing light, Power by 6 high intensity LEDs w/ optical lens.-Low Consumption and long life.-Different flashing patterns and last pattern memory recall.-Affordable strobe lights for your exterior grille.-Faster on/off response time.-Easy to install.(instruction is not included)Specification:-Shell color: as pictures show-Bulb Type: LED-Lighting Type:strobe-Light color: yellow,white,blue,white+yellow-Number of LED: 6-Voltage: 12V DC-Power:6W ( 1W/LED )-Cable length:approx. 140cm-Size:as picture showsPackage Includes:1 x 6 LED Car Strobe Flash Light

Features
Advanced fiber half shell to offer true wind-in -the-face freedom. Micrometric Automatic chinstrap buckle for quick release and precise adjustment. Supplied with a nice Scorpion Exo textile bag. ECE 22-05 Certified.
KwikWick3™ Moisture-wicking breathable helmet liner and cheek pads: Cool and dry in warm weather, warm in cool weather.

Everything you need to know about H.A.D.® Originals
You think you hold a simple tube in your hands? Not even close! Be sure you have a real quality product in front of you that does a lot and still has a lot of style!
The seamlessly knitted H.A.D.® Originals have stood for 15 years for multifunctional headwear in first-class quality à la Made in Germany.
H.A.D.® Originals are 100% made in Germany in their own production. Only in this way can we sustainably guarantee the high quality standards of the functional cloths for our customers.
H.A.D.® products are characterized by their durability in knitting and printing. Where another cloth begins to wear off after weeks and washes, H.A.D.® Originals retain their fit and (colourfastness) colourfulness even years later. This is confirmed by a continuously growing community from all over the world that leaves nothing but H.A.D.® wipes on and around their heads. She is the motivation to constantly think and improve H.A.D.® Originals. Features
Width: 25 cm Height: 50 cm durable better stretch breathable thermoregulation 100% Made in Germany Certification according to Oeko-Tex® Standard 100, class 1

Safety
Prepared for back protector Lev. 1 Warrior Protectors EN 1621-1 Level 1 on shoulders and ellbows
Comfort
50% waterproof garment prepared for thermo lining L30 prepared for H2Out lining X47 elastic knitted cuff
Performance
Step-in Clothing: layered clothing system optional
Materials
sheep leather, 0.7/0.9 mm thick, extra comfort leather
Maintenance
Do not Wash Do not bleach Do not tumble dry Line drying in the shade Do not iron Do not dry clean Do not wring