A professional matt chromed 1/4in square drive socket, produced in accordance with ISO 9000 and AS954 specifications, for increased torque and reduced risk of rounding fasteners. This hexagonal socket has a relatively short depth and a stepped collar on the shank. Overall Length: 24mm.Size. 6mm
The ABUS 65 Series brass padlocks have a body which is made from solid brass, hardened steel shackle up to 30mm and hardened steel alloy shackle 40mm and above. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. They are suitable for low to medium security requirements and are also suitable where a strong requirement for service performance and longevity is required. The padlock locking is automatic, it does not require a key.The cylinder can be re-keyed to match an existing key (Keyed Alike). Overall width: 30 mmOverall height: 50 mmOverall depth: 14 mm Shackle width: 16 mm I.D.Shackle height: 17.5 mmShackle Dia: 5 mm
ABUS Diskus 26 series padlocks have a pin tumbler cylinder with anti-pick mushroom pins, a solid lock body which resists drill, pull & manipulation attacks, and a through hardened steel alloy shackle to resist saw attacks.'Deep Weld Technology' which offers maximum case strength. Where to use it: High security requirement in severe weather conditions The shackle is manufactured from hardened steel alloy and is protected in a stainless steel body. Key operated, key retaining (a key is needed for locking. Lock retains key until locked) The anti-cut plate provides 360 degree protection from sawing while a top quality welded seam secures against impact attack. Overall diameter: 71 mmOverall depth: 30 mm Shackle width: 19.5 mm I.D.Shackle height: 17 mmShackle Dia: 10 mm
R.S.T. gauging trowel with a carbon steel blade and soft-grip handle. Used primarily for mixing and applying small quantities of cement. Size: 180mm (7in).
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S
The Stanley STA 0-65-425 7 piece FatMax Screwdriver Set Parallel / Flared / Pozi 7 piece set includes: 3 x Pozi: PZ0 x 75mm, PZ1 x 100mm, PZ2 x 125mm.2 x Parallel: 3mm x 100mm, 3.5mm x 75mm.2 x Flared: 5.5mm x 100mm, 8mm x 150mm. These Stanley FatMax ® Screwdriver have a chrome vanadium steel bars which allow high torque and reduce the risk of tip breakage. The handles are moulded directly to the shaft for a virtually unbreakable bond - giving long life and durability. The soft grip handles give a perfect combination of great grip and reduced fatigue in use and are colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.
