Free
Support
Specification:Handle Material: AlloyWrench Shaft Length : Approx. 14.6cm/ 5.7Chain Total Length: Approx. 44.5cm/ 17.5Max Usable Chain Length: Approx. 38.5cmFitment:For removing all oil filters up to 12cm diameterHow To Use:The chain is simply located around the filter and turned the chain will tighten to the diameter of the filterPackage Included:1 X Oil Filter Wrench
Features
Pants made of cowhide nappa leather Polyester mesh lining Leather stretch inserts over the knees Stretch inserts in the back of the knees and on the buttocks Hem extension with zipper Height adjustable knee protectors Tech90 (ETP-01), type tested to EN 1621-1: 2012, level 1 Bag for hip protector (hip protector, type tested according to EN 1621-1: 2012, optionally retrofittable)
Animiet durch das Ziel, Motorradfahren praktischer zu gestalten, entwickelte Roof einen neuen Helm, den ROOF DESMO, erster Integralhelm zu 100% modulabel.Mehrere Jahre im Entwicklungszentrum in Südfrankreich waren nötig für die Entstehung diese Models RO31, einer wirklichen Innovation, geschaffen, durch die Verbindung der ureigenen Traditionen bei ROOF, Sicherheit, Ergonomie und Design.Der Roof DESMO leitet eine neue Ära für Modulhelme mit hoher Sicherheit, Komfort und einfacher Bedienbarkeit ein.Zertifizierung als Jethelm und Integralhelm E22-05 J und P Top Venturi Lufteinlässe Kinnteil mit Luftzirkulation effiziente Abdichtungen schützen bei jeder Witterung abnehmbares und waschbares Innenfutter Visier mit Anti-Fog und Anti-Scratch BeschichtungPROGRESSIVER SCHUTZDoppeldämpfung durch progressive Dichte der Innenschale für einen kontrollierten Schutz. Das Luftkanalsystem erlaubt eine umfassende Belüftung des Kopfes. Ein belüfteter Schutz!TWIN DESMO TECHNOLOGIEDie Bewegung des Kinnteils kontrolliert automatisch die Bewegung des Visiers, welches sofort die Position für die jeweilige Konfiguration einnimmt, dicht abschließend als Integral und exklusiv für den offenen Jet, wofür das Visier näher zum Gesicht geht um Turbulenzen zu minimieren Visier offen oder geschlossen - alles ist möglich. DESMO: 2 Helme in einem!LUFTEINLASS VENTURIDie Lufteinlässe per Depression vorn und oben gewährleisten eine sehr angenehme Belüftung des Kopfes und im Gesichtsbereich. Die Intensität der Belüftung ist mit einer Hand regulierbar. Lassen Sie den Wind ins Haar!DUAL-DICHTUNGDie perfekte Dichtheit des DESMO wird durch Verwendung von zwei exklusiven Dichtungen von ROOF erreicht, welche zugleich durch Kompression und darüber gleitend, abdichten. Eine Lippendichtung am Helm und eine zweite Dichtung aus speziellem Schaumstoff, welche immer wieder automatisch in die Ursprungsform zurück geht, am Kinnteil. Fordern Sie den Regen heraus!DEFLEKTIVE BELÜFTUGEin Deflektor leitet bei Bedarf die Luft direkt auf die Innenfläche des Visiers und ermöglicht so eine schnelle Beseitigung von Beschlag. Sie ist dadurch sehr effizient bei unterschiedlichen Wetterbedingungen. Atmen Sie, Sie dürfen!EINHAND DESMOVERSCHLUSSDer Verschlussmechanismus ist sicher und ergonomisch. Verschluss des Kinnteils durch einfaches Herunterklappen in Position Integral. Öffnen durch gleichzeitiges Drücken der übereinander angeordneten Druckknöpfe. Eine Hand genügt, um von Position Jet zu Integral und wieder zurück zu wechseln. Behalten Sie die Kontrolle!3D KOMFORTInnenfutter, Wangenpolster, Nackenring und Windabweiser aus belüftetem 3D-Stoff, demontierbar, waschbar und adaptierbar an Ihre Kopfform für einen sehr hohen Komfort. Sie werden Ihn nicht mehr absetzen wollen!
Features:Fits models : CH13, CH14, CH15, CV13, CV14, CV15CV16.Specification:Name: CarburetorMaterial: MetalColor: SilverCarburetor Dimensions:Engine Opening O.D.:27.5mmBolt Hole Spacing:52mmNote:1.Please allow 1-3mm errors due to manual measurement.Package Included:1 X Carburetor
Kuh und Känguru-Leder Leder-Perforationen im Frontbereich, den Armen und den Beinen Zweilagig an den äußeren Oberschenkeln und am Gesäß Außenprotektoren an Ellbogen, Schulter und Knien. Stretch mit Faser-Verstärkung im hinteren Schulterbereich und Lendenwirbelbereich Vorgeformter Brustbereich, Beine, Schulter und Ärmel. Herausnehmbares Polyesterfutter mit hochdichtem, stoßdämpfendem Schaumstoff Hochfeste Nähte. Ausgestattet mit Slidern
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.