Versión de actualización CNC 1610 GRBL Control DIY Mini máquina de grabado CNC con controlador fuera de línea con ER11 Área de trabajo 160 * 100 * 40 mm

The Paslode IM65 F16 Angled 16 Gauge Brad Nailer for all second fix applications. Improved design featuring key benefits such as an open magazine for easy brad viewing, and a vastly improved line of sight to enable increased accuracy during fixing. Fitted with a no-mar tip for accurate placement and reduced damage to the wood. Quick charge battery with an improved on/off battery system, the new quick charge, long life Lithium battery fires up to 6,000 brads on a single charge (1 hour); 200 brads in just 2 minutes charge. Quick start up with no power cables or air hoses required, the tools improve efficiency and safety in all environments against pneumatic tools. It offers optimal balance, allowing any user to manoeuvre into tight spaces and work all day long without fatigue. Keep one hand free with the improved belt hook design. Consistent finishing due to an improved adjustable depth of drive system, the tool allows seamless fixing without the extra time and cost of re-touching and re-finishing work. Supplied with: 2 x Li-Ion Batteries, 1 x Charger, 1 x High Impact Carry Case, 1 x 32mm Brad Pack, 1 x 38mm Brad Pack, 1 x 51mm Brad Pack and 1 x Cleaning Kit. Specification: Magazine Capacity: 100 Brads. Fires: Nail Length 16-63mm. Cycle Rate: 2-3 Brads/Second. Max Cycle: 1,000 Brads/Hour; 4,000 brads/day. Fuel Cell: Approx. 1,000 Shots. Battery: Lithium 1.25Ah: Up to 6,000 Shots. Charge Time: 1 Hour Max. Dimensions: 301 x 288 x 90mm. Weight: 2.1kg.

3867/1 TS TORX® Bits, stainless Wera Stainless Torsion slotted bits prevent rust on stainless steel fixings caused by contamination from conventional steel tools. Vacuum ice-hardened to the same strength as conventional steel tools, and so suitable for tough, industrial use. Wera Stainless bits feature a unique Torsion zone, extending bit life over standard bits.Use wit Wera stainless Rapidaptor bit holder.Application: For TORX socket screws.1/4in Hexagon Drive, DIN 3126-C 6,3, ISO 1173Tip: TORX, stainless steel.

The DEWALT DCK206M2 Twin Pack, contains the following: 1 x 18 Volt DCH253 3 Mode SDS Hammer Drill that is ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm. The hammer drill has a rotation stop mode for light chiselling in plaster, tiles and render and an impact stop mode for rotary only drilling in wood and metal. It uses 4.0Ah 18 Volt Lithium Ion batteries to deliver high performance, long life and maximum runtime. No Load Speed: 0-1,200/min.Impact Rate: 0-4,500/min with 2.1 Joules.Capacity: Concrete: 24mm, Steel: 13mm, Wood: 26mm.Weight 3.1kg. 1 x 18 Volt DCD785 XR Compact Hammer Drill Driver has an ultra compact, lightweight design that allows it to be used in confined spaces, whilst the intelligent trigger design allows for total control of application. It has a two speed, all metal transmission for increased run time and a longer tool life. Chuck: 13mm Keyless.No Load Speed: 0-600/0-2,000/min.Impact Rate: 0-10,200/0-34,000/bpmTorque: 60Nm, 14 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 38mm 1 x 10.8-18 Volt DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LEDindicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-Ion DEWALT Slide Pack 10.8, 14.4, and 18 Volt batteries.

The Batavia Giraffe Air Telescopic Ladder is a practical, lightweight ladder for all purposes. It can be used everywhere and always has the right length. It features patented finger protection via gentle retraction. This ladder is easy to transport and is adjustable to optimal height. It has a TÜV/GS tested (quality and security) Grid-Lock system. Its compact design means it requires little space for storage. Supplied with a stabiliser bar. They are rated to EN131-6/GS Standard, and have a 150 Kilo rating.

The Thor hardwood mallets have a laminated cylindrical compressed wood heads (to a density of 1.3) fitted with flushed-in glass fibre hoops for extra security. The mallets have a conical self-locking handle and come in 3 different weights. These have an excellent resistance to impact and will give a long service life, they are suitable for hot work applications. Typical uses for these mallets include steel plate trade, casting, schools and technical colleges, general assembly, aluminium forming, aviation etc.Weight: 750g (1 3/4lb).Diameter: 67 mm (2 3/4in).

Set of 19 Facom Feeler Gauges from 0.04mm to 1mm.Blade width: 10mm.Blade length: 250mm.