Free
Support
Technologie de S.E.P. technologie de compression en tricot anatomiquement, tricoter pour L + R lié couture main rembourrage divers temps de séchage rapide bandage d’anneau pour un parfait ajustement sans odeur température de régulation à membrane technologie en tricot taille = portée du mollet sur son point le plus large en cm S (24-32), M (32-38), L (38-44), XL (44 À 51)
Specifically engineered for the touring rider who demands ultimate compatibility from their Gore-Tex® riding gloves. Ideal for touring and commuting, the Vanguard GTX® Glove will perform when you need it most. Features
Touring-specific goat leather short glove Excels in cool to warm and wet climates Under cuff short design Kwik-access dual adjustment entry YKK® Autolock zippers DWR protects surface fabric Poron® XRD® palm and knuckle protection Flexible rubber knuckle protector 3M™ Scotchlite™ reflective material for bio motion recognition Mult-e-touch™ smart device functionality Index finger visor wiper Klim-engineered rider grip articulation Entry assist pull loop
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.
Le polymère de Salvo genou Zip roches un design super confortable et ergonomique et un protecteur de SAS-TEC ultra-léger, décharge haute. Panneaux de Kevlar renforcées résistance à l’abrasion et stratégique flex zones moyenne il rock votre monde et assurez-vous que les roches ne tuent pas les genoux ! Il est également facile à zip sous et hors tension ! Matière première : 40 % chloroprène Rubber, 20 % polyuréthane, 20 % Polyester, 15 % Polyamide, 5 % élasthanne DuPont™ Kevlar® Stretch : DuPont™ Kevlar® Stretch est un tissu très résistant, léger et flexible avec étonnamment élevée à l’abrasion Fermetures à glissière YKK vous donner une qualité maximale et sans friction fonctionnalité dans toutes les conditions Créée en Allemagne, SAS-TEC propose une protection de mousse souple standard de l’industrie, construit pour durer Poids : XS, 450g Coutures FLATLOCK sont solides, flexibles et vous garder sans chafe Grip anti-dérapant garantit un ajustement parfait avec du silicone supplémentaire ou expansé relief lors des ouvertures de hem. Il conserve également votre matériel au bon endroit pour un confort maximal et de la protection Certifié indique la conformité avec la conformité stricte, qui est obligatoire pour certains produits dans l’espace économique européen
Material
goatskin palm back of hand in Nyspan with leather coating
Lining
pique push-pull lining
Membrane
GORE-TEX® membrane
Comfort
visor wiper elasticated panels on back and fingers special leather at thumb and finger which allows smartphone operation velcro adjustment at wrists velcro adjustment at cuffs + Gore Grip technology
Safety
certified under norm EN 13594:2015 "protected glove for motorcyclists" TEMPERFOAM® knuckle protection special foam knuckle & finger protection reinforced edge of hand Teramid® protection at ball of thumb 3M SCOTCHLITE™ reflectors
Live fast, dress fast, be fast. There is nothing slow in the Hypersport Prime Heroâs vernacular or mindset. TrackSpec⢠leather, integrated TPU shoulder & elbow caps, extensive Unit-Fused⢠construction, and a full D3O® package (shoulders, elbows, back) are fitted for a full court press of reinforcement. The Hypersport Prime Hero also features ICONâs new SportCuff⢠- designed to even get the jacket on fast. Lead the pack - the Hypersport Prime Hero Jacket.
Features
FIT: ICON Attack Fit MATERIAL: 1.2-1.4mm TrackSpec⢠Leather Chassis PROTECTORS: D3O® Impact Protectors - Shoulder, Elbow, Back LINER: Insulated SatinCore⢠Vest Liner - Removable DETAILS: Unit-Fused⢠Construction, Integrated Flex Zones, TechMesh⢠Panels, TPU Injected Shoulder, Back & Elbow Plates, Pre-Curved Arms, YKK® Zippers, Drop Tail, Interior Zipper, Slash & Cargo Pockets, Waist Zipper Connects To Hypersport⢠Pant, Streamlined Sportcuffâ¢, Neoprene Collar, Thumb Loops