Forcefield Superlite, back protector

Features
Regular/Straight cut in the Five-Pocket design ergonomically adjusted cut stylish comfortable fit through stretch content height adjustable pockets for knee protectors pockets for hip protector particularly abrasion and tear resistant thanks to DuPont™ Kevlar® fiber

The Carlsbad was built for the hard-charging Adventure rider. Like the Carlsbad Caverns in New Mexico,it has been stripped of everything but it’s essential elements. Light and fast with maximum utility and mobility wrapped into an abrasion resistant,water proof package. Features
Gore-Tex® performance shell Guaranteed to keep you dry® 500d cordura® rip stop fabric in abrasion zones Ykk® zippers Leather inner knees with dwr treatment, overlaid on inner leg panels for wear/heat resistance safety D3o® level 1 hip armor(2) D3o® level 1 knee armor(2) cargo 2 storage pockets on side thigh visibility Black3m™ Scotchlite™ reflective material ventilation Front thigh intake vents Back thigh exhaust ventsfit/style/comfort Mapped mesh wicking liner with cordura in inner knee and cuff for wear resistance Adjustable cuff design allows pant to be open enough to adjust boot and knee guards/braces Adjustable waistband via velcro side waist adjusters Articulated fit Glove-friendly zipper pulls

Features
Jeans in the typical 5-pocket style current wash fashionable straight leg

Fitment:1.For Mercedes Benz W213 E200 E300 E400 E43 AMG 2016-2018 2.Also Fit For E43 AMG Models 2016-2018!Specification:TypeFront Diamond Style GrillMaterialHigh quality ABSColorGlossy BlackWeight2755gStyleDiamond lookPlacement on VehicleFront, UpperFitment TypeDirect ReplacementFeature:1.Made Of Excellent Quality ABS.2.Perfect fitment with no modification required.3.Gives your vehicle a new style and appearance.4.Accentuates your vehicles overall look.5.A great upgrade for your vehicle.6.Provides better airflow to the radiator to help the cooling process better.7.Please check the fitment carefully before buying.8.No installation instruction included, professional installation is highly recommended!Package Included:1 PCS Front Grille（WITHOUT EMBLEM）Note:1.Please allow 1-3CM differs due to manual measurement.2.Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

The F5 is the ultimate all-day helmet. Designed 100% from the ground up, only the best designs, years of rider feedback, testing data and cutting-edge technologies are integrated into this revolutionary lid. Combining extremely low weight, intuitive venting, and next-gen safety features, KLIM has engineered the F5 to provide the best possible riding experience in the most demanding environments, all day. Features
Full Klim® Karbon fiber shell One of the lightest helmets in the industry Extra large eye port for maximum field of vision Dual density eps Wind tunnel tested Fid-Lock® strap closures (extremely easy to take helmet on and off) ventilation Most ventilated helmet in the industry 18 intakes and 8 exhaust vents Direct vent eps design Designed to intake air at speed / exhaust heat while at low speeds or stopped safety Shell structure designed for maximum strength while remaining lightweight Neck brace compatible Exceeds ECE certifications comfort Focus on fit Anti-microbial and antibacterial materials Moisture-wicking Drylex® comfort liner 3 shell sizes and 3 eps sizes for the best fit and maximum comfort to fit your head like a glove Helmet bag Breath box Windstopper® liner Extra peak visor/hardware