4pcs T1 T2 Protección de las manos de seguridad Serrín Sierra de madera Empuje el conjunto de varillas para la mesa de carpintería Herramienta de carpintería

Stahlwille reversible, fine tooth Ratchet Insert Tool with 60 teeth. Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003. NOTE: Please pay attention to insert size required - 9 x 12 or 14 x 18.CAUTION: A modified torque setting is required if using the size 40HD. MADE IN GERMANY.Stahlwille Ratchet Insert Tool. Size: 14 x 18mm.Drive: 1/2 in.

The Faithfull Centre Square (Finder) is made from ground tool steel and has a hardened and tempered blade. The device has a useful square for rapid location of round bar or disc centre. To execute, place the round bar between the centre square. Scribe different lines on the workpiece each time changing its position. The centre of the scribed lines will provide the accurate centre of the workpiece. The Centre Square (Finder) is supplied in a box.Bar Capacity: 75mm.

These Forgefix Carriage Bolts are Zinc Plated, and ideal for timber to timber joining. They come complete with a hex nut and are fully threaded to 100mm. Also known as 'Cup Square Hex Bolts', the square underneath the Cup stops rotation of the bolt when tightening. Conform to DIN 603 and DIN 934 standards. Available in a comprehensive range of sizes to suit most applications. APPLICATIONUsed mainly for fastening timber to timber and is extensively used for timber joist construction in house building and numerous decking applications. A Carriage Bolt, also known as a Coach Bolt or as a ‘Fully Threaded Cup Square Hex Bolt’, has a domed or countersunk head, and the shank is topped by a short square section under the head. The square section grips into the part being fixed (typically wood), preventing the bolt from turning when the nut is tightened. A rib neck Carriage Bolt has several longitudinal ribs instead of the square section, to grip into a metal part being fixed. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.Carriage Bolt & Nut ZP M10 x 50 Bag 10

Medium flexibility grinder pads suggested for 60+ finer grits. It's unique flexibility and durability make this our best selling pad. This range can be considered for universal use. Made in Great BritainType. 116-14MTo suit. 125 mm Mini Grinders.Thread.M14 x 2. Abrasive Disc Size 125 mm x 22 mm (5in). Machine Fitted :-AEG, Black and Decker, Bosch, Casals, ELU, Fein, Flex, Hitachi, Holzher, Kress, Makita, Manson, Metabo, Perlea, Ryobi, Stayer, Teksan. Pin Spanner - Red

Roughneck Gorilla Gripper is a safe and easy way to grip, lift and carry all types of sheet materials, doors and worktops. Made from aircraft quality aluminium with special rubber gripping pads. Significantly reduces stress and potential injuries to your back, shoulders, neck, hands and fingers. A must for those handling large cumbersome boards and doors on a daily basis. Soft-grip cushioned handle with 3 sizes available, up to 19mm, 10 to 28mm and 35 to 50 mm, to handle the majority of board and door thicknesses.This Roughneck ROU32620 will clamp easily to boards or doors from 35mm up to 50mm for ease of movement around rooms or work site.

These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work, and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.Length (A): 125mm (5 in). Blade length (B): 16mm (0.63 in). Head width (C): 16mm (0.63 in). Head depth (D): 8mm (0.31 in). Tip width: (F): 1.6mm (0.06 in). Cutting capacity: 0.4-2.0mm. Cutting edge: Micro-bevel. The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.