Stanley Roller Cabinets are designed for use in conjunction with the module system, with 3 modules fitting each drawer. They feature a central locking system for security. The drawers of the cabinets have 35mm ball bearing slides for full drawer extension, non-slip mats for the drawers are included. The cabinets have swivelling and locking wheels for manoeuvrability and security. Load capacity: 300kg. Number of drawers: 4.
The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.
The Knipex 74 91 Series high leverage centre cutters with dipped PVC handles and centric precision cutting edges with an integrated forged joint axle for heavy-duty use. High cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle, transmission ratio and ergonomic handle shape. Like most of the Knipex range, these cutters are oil hardened and tempered for longer life, with cutting edges separately induction-hardened to approx. 64hrc. They are made from top quality high grade Chrome Vanadium tool steel with polished hardened heads. Specification Cutting Capacity: Piano: 3.5mm, Hard: 3.8mm, Medium: 5.0mm.Length: 250mm (10in).
The Forge Padlock Bolts or Brenton Bolts are used to secure gates, or doors which require locking with a padlock. The Forge padlock bolt is designed for heavy-duty use with a strong steel bolt and locking collar. It comes in a variety of sizes and are either black powder coated or galvanised. Supplied with fixings for screwing into position and also bolt through fixings for additional security. Fitting Instructions: 1. Position Padlock bolt in the desired position and mark the square fixing holes with a pencil. 2. Drill holes using a Ø6mm drillbit and use the bolts provided to fasten in place. 3. Position the keep and ensure that the bolt moves freely through the hole.The FGEPBLTGAL6 Padlock Bolt has the following specifications: Bolt Length: 150mm.Finish: Galvanised.
The Forgefix Nyloc Hexagonal Nuts incorporates a nylon component to effectively lock the nut into position on the bolt. The nylon component has a smaller inside diameter than the actual nut. This locks the nut in place by squeezing the nylon firmly around the bolt when tightened. Unlike a standard locking washer, the Nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened. The nuts are zinc-plated for increased resistance to corrosion. Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so. APPLICATION: Where a permanent fastening is required and loosening must be prevented by movement or vibration. Can be used on most bolt products including HT Bolts, Carriage Bolts, Threaded Rod etc. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.Nyloc Nuts & Washers Zinc Plated M4 Forge Pack 50
