Free
Support
Tipo:Luz de marcha atrás,Luz de Freno,Luz de Direccional; Flujo Luminoso (lm):300-400; Temperatura del Color (K):6500-7000; Vida útil (h):> 50000; Voltaje:DC 12V; Base de la Bombilla:T20 (7440,7443); Color de Luz:Blanco Frío; Medidas (cm):522; Contenido del Paquete:1 Par de Focos LED; Características:De Alto Rendimiento; Material:Plástico PCB Resistente al agua Cubierta Epoxy; Tipo de Chip:SMD 5050; Aplicación primaria:Coche
Type:Feux clignotants,Feux de position latéraux,Eclairage plaque d'immatriculation,Lumières pour tableau de bord; Flux Lumineux (lm):100-150; Température de Couleur (K):6000; Tension:DC 12V; Base de l'ampoule:1156; Couleur de lumière:Blanc froid; Dimensions (cm):5.0 x 2.0 x 2.0; Contenus du paquet:1 paire de Lampes LED; Consommation:2W; Type de puce:SMD 5050; Application première:Camping-Cars,Automatique
Key points:1. Display information: instantaneous fuel consumption, instantaneous fuel consumption of 100 km, acceleration of 100 km, water temperature, voltage, speed, mileage, travel time, clock2. alarm: engine failure, water temperature is too high alarm, voltage is too low alarm, shift reminder, speed alarm, fatigue driving reminder3. color LED screen is highlighted, non-destructive installation, plug and play4. start with a car, sleep with a car, effectively protect the car battery while retaining the manual switch machine, more conducive to control HUD5. the car fit model is compatible with OBD II or EUOBD (automatic diagnostic system ELM327)Features:1. The vehicle adaptability model is compatible with OBD II or EUOBD (Automated Vehicle Diagnostic System) car plug and play.2. More practical driving data: instantaneous fuel consumption, instantaneous fuel consumption of 100 km, acceleration of 100 km, water temperature, voltage, speed, mileage, travel time, clock, and detectable vehicle fault diagnosis code, eliminating the need for professional equipment to eliminate3. Display/shading integrated design, covering too many head-up lights, no glare at night driving4.18 kinds of screen one-button switching, you can manually set the driving data to be displayed, press the dial button vertically to replace the desired mode.5. Use the car to sleep and protect the car battery when starting up, while retaining the manual switch machine, it is more beneficial to control the HUD.6.
Description:The brand for Ford Cars, in the replacement tire pressure sensor or tire pressure alarm or exchange tires, need to carry out tire pressure reset operation.Operation Method:(1)Set the vehicle into the tire pressure training mode (plug the key, step on the parking brake, the car keys from the off to open 3 times, and then step on the parking brake, turn off the car keys, and then from the off to open three times; Training mode for the vehicle to start the state of the three consecutive dangerous alarm flash), if you hear the speaker sounded that the training mode has been enabled;(2)Starting from the left front tire, the antenna of the dedicated tool for tire pressure monitoring is facing upwards against the tire sidewall near the rim of the valve stem to start the antenna. Press and release the start button and wait for the speaker to emit a chirp. Once the speaker is chirping, the sensor information is read and the turn signal to be read at the next position will light;(3)When the speaker is ringing and the right front turn signal light is on, the remaining three sensors repeat step (2) in the following order: 3.1. Right before 3.2. Right rear 3.3.Left rear;(4)When the left rear sensor has been read and the speaker is also issued twice, the read process is completed and the body control module also exits the read mode.Precautions:1: The new battery power lead to less than the standard launch power, after use, please charge about 2 hours;2: Is the position of the a
Type:LED; Puissance (W):72W; Lumen(LM):5040lm; Température de couleur:6000K; Rayon:Spot; Durée de vie:30000hours; Quantité de LED:24; Couleur de la lumière:Blanc; Dimensions/LxLxH:30.5x7.3x10.7cm; Poids net (kg):1.8kg; Que contient la boîte:x jeu de vis,x Pad de fixation,x bande de lumière; Fonction:Barre Lumineuse,Lampe pour le Travail; Type de puce:LED Haute Performance,Cree; Matériau:PC,Aluminium Die-cast; Caractéristiques:Pare-vent,Antirouille,Pare-chocs,Double Rang,Etanche,Décoratif,Feux; Tension d'entrée:9V-32V,DC; Pour:Grue,SUV,Bulldozer,Automatique,Road Roller,Treedozer,Véhicule de commandement militaire,Pelleteuse,Véhicule communication,Bateau,Véhicule de sauvetage,Ingénierie voiture,Voiture de police,Off-Road,Fire Engine,UTV,Véhicule spécial,Tracteur,Mining Truck,Véhicule de Transfert Automatique; Classe IP:IP 67
Type:LED; Puissance (W):2W; Rayon:Haut; Douille de lampe:T10; Quantité de LED:9; Couleur de la lumière:Rouge; Dimensions/LxLxH:3.5x1x1cm; Poids net (kg):0.003kg; Fonction:Lampe de portière,Feux clignotants; Type de puce:SMD 5050; Matériau:Plastique; Caractéristiques:Puissance élevée
