Flap wheels quickly remove paint, varnish and rust, leaving the surface smooth and clean ready for repainting. For use on wood, metal, fibreglass, filler and plastics. Strips and sands in one operation without clogging. Many uses on cars, boats, in the home, in the garage and workshop. 6 mm (1/4 in) shank fits all drills, economical and longlasting.Size: 60 x 30mm.Grit: Medium.
The Bahco LTS-30-E Open Reel Fibreglass Tape has a nylon coated fiberglass blade that shows both metric and imperial graduations. The blade can withstand pulling force of around 500kg. Debris can be easily washed from the blade.
Stahlwille INHEX Extra long sockets have 1/2in square drive and are suitable for hexagon socket head head screws. They are manufactured from chrome alloy steel and are chrome plated. Manufactured to DIN 7422 (metric sizes). MADE IN GERMANY.Stahlwille In-Hex Socket 1/2in Drive Xtra Long. Size: 5mm.Overall length: 120mm.
Paslode IM350+ Diamond point clipped head Nail packs with paper strip, supplied with Paslode Special Impulse gas fuel cells.FINISH: All Paslode nails are Chrome 6, cadmium and lead free and are available in five finishes to meet corrosion requirements.Bright: Economy and bright nails meet the Eurocode 5 requirements for applications in service class 1 (indoor) Specification - No coating.Galv Plus : Meet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn / Al alloy approx 15µm.Electro Galv : Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7µm.Hot Dipped Galv : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - Zinc coating minimum 50µm Stainless Steel : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - A2 according to AISI 304, and A4 according to AISI 316.SHANK: Smooth Shank: The standard nail, offering high shear value and lowest withdrawal resistance. Fixing across the grain. Fixing into end grain. Clenching applications. Specification - Number of centres will vary with shank diameter.Unilock Shank : Increases withdrawal resistance. Drives easier than ring shank fixing across the grain. Specification - The ringed parts have 24 rings per inch.Ring Shank : Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification.HEAD TYPES :Round Head : The head area is designed to maximise resistance to the head being pulled through Specification - Head size between 2.0 and 2.5 times wire diameter according to EC5Clipped Head : Increases number of nails per strip. The head area is designed to maximise resistance to the head being pulled through Specification - Head area corresponding to full round head area, according to EC5
The Zarges K470 Aluminium Case is a high-quality aluminium universal box. The lid has a stainless steel hinge strip, two lid straps and foamed seal all round. The case has cast-aluminium stacking corners, and a high level of stability due to 3 fully-welded aluminium profile frames. Ergonomic and durable, it has C fasteners for at least 20,000 operating cycles, and profile-section joints that are fully welded. The snap fasteners can be secured with a plug lock, have lead seals, and provide protection against bursting open. They can also be sealed by a padlock (Max shackle thickness 6mm). Ergonomic handles provide comfortable handling, with loads of up to 50kg. Also has ergonomic heavy-duty sprung drop handles. The clearance dimensions are approximately 30mm less than the inside dimensions. All-round beading and corner beads give even more durability. Comes in 11 standard sizes. Customised sizes available.Zarges K470 Aluminium Case. Internal length: 550mm. Internal width: 350mm. Internal height: 150mm. External length: 600mm.External width: 400mm.External height: 180mm. Volume: 29 Litres. Weight: 4.2kg.
The Byron 7720/7730 surface mounted bell push is illuminated and can be connected to all wired Byron doorchimes. 7720: Black.7730: White.The Byron 7720 Bell Push Illuminated has the following specification: Colour: Black.Size: 55 x 15 x 24mm. Weight: 30g.
