Cam Shaft Cam Shaft Position Sensor For Audi Volkswagen VW

Specification:MaterialPU LeatherFillerCottonColorBlack,Coffee, Orange, Beige, Wine RedApplicationUniversal for Cars,Home and OfficePositionFront Seat and Back SeatFeature:1. Beautiful and have good quality.2. Use green cloth, keep the car space air fresh.3. Bottom cover design, not easy to move away, protecting your seat from damage.4. Easy to install.Package Included:1 X Rear seat cover2 X Front seat coverSome Accessories

Features
Winter boot in synthetic material with faux leather effect Matching velvet in the upper part of the shoe for added comfort Matching sole on the base, flexible and resistant Matching shoe laces

Anyone who has ridden in the rain knows it s your legs that bear the brunt of the precipitation. From tire spray to wind blast to passing vehicles - keeping your lower half dry has been a challenge. Until now. Introducing The Icon Patrol Waterproof Pant. Built using the same materials and techniques as the jacket, the Icon Patrol Waterproof Pant will go the distance with unmatched safety, comfort, and weather protection.
To keep out the wind and rain, the abrasion resistant nylon chassis is fully seam-sealed and includes full-leg waterproof YKK® zippers and quick action magnetic storm flaps. Housed within the chassis is a full complement of Field Armor approved impact protectors. Finally, the 3M® reflective graphics package ensures you ll be seen on the darkest nights.

Features: Removable Icon field armor impact protector knee Removable Icon field armor impact protector hip Waterproof seam sealed construction YKK waterproof zippers Magnetic storm flap closures 3M reflective panels Six storage pockets Full-length side zippers
Info: These pants are sized to fit as overpants. If you wear a size 34 pant-buy a size 34 Patrol Overpant if you intend to wear them over your jeans. If you plan on running commando-buy a size 32

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Specification:Material: MetalColor: SilverSize: Approx. 2x4x11.3mm/ 0.08x0.16x0.44Made of hard metal, these kind of tire stud screws are strong and durable in use.It has a low ground pressure and it is environmentally with minimum impact.It is easy to install with certain drill and can match well with your vehicle tires.Please choose appropriate size of new studs in the installation process in terms of the depth of tire thread.This kind of screws are suitable for most of tires and add ultimate off-road capacity to your ordinary car, truck,motorcycles,etc. It brings a good anti-slip property for your tires.Installation:1. Drill (using a very small bit) down from the center of chosen knob into the tire.2. Drill a screw up from inside to out. If the angle isnt perpendicular to the tire, it will stick out one side or the other.Do one hole and screw at a time.3. Put duct tape over the screws on the inside of the tire. Sometimes it is best to use two layers of tape.Package Included:100 X Tire Stud Screws

Features
Regular/Straight cut in the Five-Pocket design ergonomically adjusted cut stylish comfortable fit through stretch content height adjustable pockets for knee protectors pockets for hip protector particularly abrasion and tear resistant thanks to DuPont™ Kevlar® fiber