Free
Support
Features: Light weight makes you carry easily. Solar powered, without extra wires, environmental protection, user-friendly, cost-saving. Superb high bright LED beads, long lifespan, flicker-free and anti-glare light without strobes and radiation, it can keep your eyes away from exhaustion. High conversion rate of superb polycrystalline silicon solar panel provides you better performance. Light up automatically in darkness provides you safe walk. Tapered reflective film provides strong reflection light; cylindrical astigmatism column emits softer light from inner to outside; PVC prism lamp shade gives you perfect illumination. Completed accessories, easy to install and operate, just to push the button for enjoyment. Be suitable for different occasions, including villa, garden, yard etc.
Der handliche 10\" Subwoofer liefert ein präzises und tiefreichendes Bassfundament. Er ist mit einer 600 Watt starken Class-D-Endstufe ausgestattet, die zusätzlich zwei Topteile E435 (alternativ ein Topteil E 835) oder einen weiteren passiven Sub versorgen kann. Mit zwei E-Connect-Aufnahmen ausgestattet, dient der Sub, wahlweise stehend oder liegend,als Basis für weitere Elemente. Für den bequemen Transport sorgt der ergonomische Tragegriff. Features Systemsubwoofer mit 600 Watt Ampleistung besonders kompakt und leistungsfähig Paralleler Anschluss von max. zwei E 435/ein E 835 Mid/High-Units oder eines passiven Subwoofers 2 Systemfilter (wählbar je nach Anzahl der in einer Linie verbundenen Mid/High-Units) 2x E-Connect Systemflansch mit integrierter Signalverbindung sehr geringes Gewicht (19 kg) Technische Daten Modell E 110 Sub A Produkt-Kategorie Elements Frequenzgang -10 dB 45 Hz ? 150 Hz, über aktive Systemweiche Verstärker Subwoofer 1x 600 W / Class D @ 4 Ohm Aktive Schutzschaltungen RMS-Limiter, Subsonic-Filter, Systemfilter 2fach, je nach Anzahl der angeschlossenen Mid-High-Units Anschlüsse 1x XLR Kombi In, 1x XLR Out, Speakon Parallel Out., 2x E-Connect out Basslautsprecher 1x 10\" Hochständerflansch 2x Flansch (E-Connect) Abmessungen (BxHxT) 30 x 48 x 46 cm ? 11-13/16 x 18-7/8 x 18-1/8\" Gewicht 19 kg / 41,9 lbs.
Features: SOLAR POWERED: Energy saving, no wiring to install, stick and play. PHYSICAL REPELLENT: No poison, no chemical, repelling pest via sonic wave, safer to use. 400? PROTECTION AREA: Repel pest within 400?, practical for garden and farm. 120HR WORKING TIME: 600mAh high battery capacity support 120hr constant working. REPLACEABLE BATTERY: Battery can be replaced to extend service time.
The ADJ Mega QA Go is a compact, low profile battery powered LED Par designed for uplighting and stage lighting, and will bring color and excitement to any party. This fixture features an unique ?sit-flat? design so that it may sit directly on the ground or inside truss without the scissor yoke because the power & DMX ins and outs are mounted on the side of the fixture, not on the rear. The Mega QA Go features 5 x 4-Watt, 4-IN-1 RGBA LEDs which offers smooth Color Mixing, has a 40-degree beam angle, 5 operational modes (including DMX, Sound Active Mode, RGBA Dimmer Mode, Auto Run Mode, & Static Color Mode), and has 8 DMX Channel modes for a variety of programming options. Users can also use the Airstream IR App or ADJ UC IR wireless remote, which is sold separately, to control the Mega QA Go. Technische Daten Rechargeable Lithium battery life: 4 hours full on (with a full charge); 5.5 Hours in Energy Saving Mode (with full charge, 4 hours charge time Stand Alone or Master/Slave Configuration Beam Angle: 40 degrees 64 built-in Color Macros DMX-512 protocol Color strobe effect Great as an architectural wall wash or for performance stages where traditional stage lighting emit a lot of heat onto performers Compatible with UC IR wireless remote (sold separately) & Airstream IR app Linkable via 3-pin XLR cable Electronic Dimming: 0-100% Flicker Free Includes a scissor yoke to hang on truss, mount on a wall or set on the ground Ultra bright slim flat black Par with 5 x 4-Watt, 4-IN-1 Quad RGBA LEDs (rated at 50,000 hrs.) Smooth color mixing (fast or slow color change operation) Unique ?sit-flat? design: Power & DMX Ins/Outs intelligently designed so the unit can be set flat on the ground or set inside truss Rechargeable Lithium battery built-in to fixture 8 DMX Channel modes: 1, 2, 3, 4, 5, 6, 7 or 8 channel modes 5 Operational modes: Auto Run Mode (16 Color Change Mode, 16 Color Fade Modes, & 1 Combined Mode), Sound Active Mode (16 Modes), RGBA Dimmer Mode, Static Color Mode (64 Colors), and DMX Controlled Digital DMX Display with 4-button menu for easy navigation Power Draw: 28W Max IEC AC input and out put on the side of the fixture to daisy chain the power cords (link up to 20 fixtures) Multi-voltage operation: AC 100V-240V 50/60Hz Dimensions (LxWxH): 5.5\"x 9\" x 10\"/ 253 x 227 x 140mm Weight: 4 lbs./ 1.9 kg.
4 luces LED Kit de 2 Blanco 2 Red de 1/10 1/8 Traxxas HSP Redcat RC4WD Tamiya axial SCX10 D90 HPI RC Car
Der Scenesetter24 ist wohl eines der meistverkauften Lichsteuerpulte weltweit. Mit ihm lassen sich im Handumdrehen bis zu 24 einzelne DMX Dimmerkanäle steuern. 48 Shows lassen sich aus bis zu 4200 Szenen erstellen und abspeichern. Flash Tasten ermöglichen eine komfortable Live-Steuerung und die zusätzlichen Flash und Blackout Tasten sowie die Überblendsteuerung vervollständigen das Gerät. Technische Daten konventionelles DMX Dimmerpult 24 unabhängige DMX Kanäle 4200 frei programmierbare Szenen Passwortschutz für Szenen (ideal für den Verleihbetrieb) 48 frei programmierbare, ebenfalls passwortgeschützte Programme Einzellauflichter oder Mix-Funktion Blind & Dark Funktion. Blindprogrammieren 24 Einzelkanalfader 24 Flash Tasten (je Kanal eine) A/B Master Fader. Überblendung von einer Einstellung zur anderen TAP Taster um die Geschwindigkeit der Programme zu steuern Unabhängige Geschwindigkeitsund Überblendregelung FULL-ON Taster für 100% Output auf allen 24 Kanälen (Flashen) helles LCD Display kompatibel zu allen DMX 512 Dimmern Sound-to-Light Steuerung über eingebautes Mikrofon oder auf der Rückseite angebrachten Cinch-Audioeingang Einstellen der Musikempfindlichkeit Auslösetaster für Nebelmaschinen mit Statusanzeige (Heizen/Bereit) DMX Polaritätsumschaltung (2-, 3+/2+, 3-) Midi-Ein& Ausgang für die Ansteuerung durch Keyboards oder Miditastaturen externes 12V DC Netzteil im Lieferumfang (500mA) 19 Rackgehäuse zum Einbau in Cases und Konsolen mitgelieferte, abnehmbare Kunststoffkanten für die Verwendung als Tischgerät ohne Case Abmessungen: 267 x 483 x 76mm Gewicht: 5kg