Car Sticker La Vita e Bella Decals Vehicle Truck Bumper Window Wall Mirror Decoration

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

* straight cut * front-pockets * eqaulettes | Article: Brandit Us 1/2 Shirt, beige, Size 4XL | Article: Brandit Us 1/2 Shirt, beige, Size 4XL, beige, Size 4XL

Kurzinfo: Brodit ProClip Center mount - Halterung - Schwarz Gruppe Zubehör Hersteller Brodit Hersteller Art. Nr. 855141 Modell ProClip Center mount EAN/UPC 7320288551418 Produktbeschreibung: Brodit ProClip Center mount - Halterung Produkttyp Halterung Vorgesehen für Handy Geeignet für Installation Auto Produktmaterial ABS-Kunststoff Ausführliche Details Allgemein Produkttyp Halterung Vorgesehen für Handy Geeignet für Installation Auto Produktmaterial ABS-Kunststoff Farbe Schwarz Verschiedenes Kompatible Fahrzeuge Renault Kadjar / 2016 Platzierung/Befestigung Armaturenbrett

Features: [Retro Knob Design]: This BT speaker is retro appearance, fashion and cool. And the knob is more convenient to control. [BT 4.2 + EDR Class 2]: This speaker supports BT device with A2DP function. Integrated with BT, it can be connected with BT devices within 10 meters. [Multi-functional Speaker]: Multi-functional speaker allows to switch modes between BT mode, TF card mode, Line in mode. Multiple modes for music enjoyment. [High Fidelity Sound Quality]: Enjoy crisp and clear audio with impressive 360Surround Sound powered by two 3W acoustic drivers. [TF Card Reader]: Supports insert TF card playing, up to 32G extended memory supported, intelligent voice prompt operation of the function status. [Hands-Free Call]: BT function supports hands-free call. Remote control for convenient experience.

Scott tear-offs for the Scott 80S goggles. | Article: Scott 80S Works Pro Tear Off 3 Pack Tear Offs | Article: Scott 80S Works Pro Tear Off 3 Pack Tear Offs, Size One Size

Beschreibung Automatik-Ladegerät MXS 5.0 Test & Charge Kombination aus Batterielader und Tester 3 einzigartige Spannungsprüfprogramme Aktivierung von Batterien mit Sulfatgehalt Reaktivierung von tief entladenen Batterien Pulsladeerhaltung für maximale Lebensdauer Das CTEK MXS 5.0 CHECK ist eine einzigartige Kombination aus Batterie-/Lichtmaschinenprüfer und Batterieladegerät der neuen Generation es verfügt über herausragende Funktionen. Es bietet eine Batteriediagnose, eine spezielle Rekonditionierungsoption, eine einzigartige Erhaltungsladungsfunktion, eine Option für optimiertes Laden an kalten Wintertagen sowie das Laden von anspruchsvollen AGM-Batterien. Das MXS 5.0 CHECK kann mit beiden Ladeoptionen gleichzeitig verwendet werden. Das Prüfinstrument ist sehr leicht zu verwenden es umfasst drei Spannungsprüfprogramme: BATTERY, START POWER und ALTERNATOR. Die drei Spannungsprüfprogramme des MXS 5.0 CHECK arbeiten mit oder ohne 230 V-Anschluss. Ausstattung: 3-stufiger Batterietester 8-stufige