Microfiber Leather Car Seat Lumbar Cushion Air-condition Folding Quilt Blanket Waist Supports Pillow

Specification:OEM Part Numbers : 1K0906627AVoltage : 12 VElectric Pneumatic, Solenoid ValveLength : 79 mmHeight : 79 mmNumber of Ports : 2 Pin ConnectorQty: 1Car : For AUDI, For SEAT,For SKODAVWFeature:Waterproof, wearproof and corrosion resistant.With high electric insulativity and quick heat dispelling.Note:If you have any doubt whether this part will be suitable for your vehicle please contact us before buying stating either the full registration number or the VIN (chassis) number, and we will confirm suitability.Package Included:1 x Electromagnetic Valve

The most ADVANCED & TRUSTED battery charger in power sports! OptiMate 4 Dual Program includes two charging programs, program 1 is for direct charging of a battery, program 2 allows safe and unsupervised charging through a BMW motorcycle’s CAN-bus controlled 12V socket. OptiMate 4 Dual Program tests before & after charging and can recover a ‘dead-flat’ battery from as low as 0.5 Volts. Special features in CAN-bus program:
Automatic KEY-LESS activation and continued maintenance until charger is disconnected. Safe low voltage pulse desulphation.
Features
CHARGING AMPS : 1A (constant current) USE : Indoor / Outdoor (lowest temperature: -40°F / -40°C). SAVE : Low Volt Start of 0.5V + 2-step* desulphation recovery (*1-step low volt pulse save during CAN-bus mode). IDEAL FOR : STD, AGM & GEL 12V batteries from 3 – 50Ah. INPUT : Global (100-240V 50-60Hz), high efficiency (CEC listed), fully sealed. STYLE : Weatherproof case with wall mounts, with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector. Weatherproof battery lead & standard battery clip set included.
SAFE No risk of overcharging. Totally safe for vehicle electronics. Sparks suppressed. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected. 3-year limited replacement warranty.

Kurzinfo: Brodit ProClip Center mount - Befestigungsklammer(n) - Schwarz Gruppe Zubehör Hersteller Brodit Hersteller Art. Nr. 854749 Modell ProClip Center mount EAN/UPC 7320288547497 Produktbeschreibung: Brodit ProClip Center mount - Befestigungsklammer(n) Produkttyp Befestigungsklammer(n) Produktmaterial ABS-Kunststoff Ausführliche Details Allgemein Produkttyp Befestigungsklammer(n) Produktmaterial ABS-Kunststoff Farbe Schwarz Verschiedenes Besonderheiten Mittelmontage Platzierung/Befestigung Armaturenbrett

Kurzinfo: Belkin - Halterung für Kfz Gruppe Zubehör Hersteller Belkin Hersteller Art. Nr. F8M978BT Modell EAN/UPC 0745883684694 Produktbeschreibung: Belkin - Halterung für Kfz Produkttyp Halterung für Kfz Vorgesehen für Handy Geeignet für Installation Auto Paketinhalt Universalhalterung, Armaturenbrett-Adapter Ausführliche Details Allgemein Produkttyp Halterung für Kfz Vorgesehen für Handy Geeignet für Installation Auto Paketinhalt Universalhalterung, Armaturenbrett-Adapter Verschiedenes Besonderheiten Drehbar um 360°, Neigung, cable management Platzierung/Befestigung Windschutz, Armaturenbrett

Material
highly abrasion-resistant kangaroo leather
Lining
breathable mesh inner lining 3D mesh at back
Comfort
schoeller®-keprotec® stretch panels at arm, crotch & back of knee aerodynamic racing hump perforated leather panels wooden knee sliders front air-vent zipper cuff in stretch material anti-slip pad in knee area for extra grip
Safety
titanium protectors on shoulders, elbows & knees double-stitched schoeller®-keprotec® fibre panels located in back/knee/thighs and upperarm Soft protectors at neck, tailbone, hip and ribs EN 1621-2 approved SAS-TEC® back protector EN 1621-1 approved SAS-TEC® 3D shoulder & elbow protectors Leather protector pockets for increased protection double leather reinforcement on seat Velcro for optional chest protector EN 1621-1 approved height-adjustable SAS-TEC® 3D knee protectors hard plastic reinforcement at forearm "engineered by Skill Skin track performance" APS "Air Protect System"
Shipping info airfreight Due to the safety regulations in the airfreight, we have to remove the gas cartridge of this article for shipping outside the European Union. Upon receipt of the product, you can use any commercially available 60cc or 100cc gas cartridge to restore the function of the airbag.

AGV The K-3 SV was developed from the experience AGV gained during the design process of the Pista GP and Corsa helmets.
Thanks to the use of Finite Element Analysis (FEM), the technical department developed a benchmark product in terms of comfort, aerodynamics and safety. This helmet has a wide appeal and is suitable for young riders with a passion for racing as well as for more mature riders looking for comfort and high performance characteristics.
Thanks to CFD Analysis (Computational fluid dynamics), the special ventilation system provides maximum airflow to the head through two front and side vents, one central vent and two extractors at the back of the helmet.
The sanitized Dry-Comfort internal components can be removed for washing. The mechanism for opening and closing the visor has three customisable settings according to helmet use (Touring, Race and City) and features the XQRS system for quick removal.
The AGV K-3 SV has been designed to accept the new integrated communication platform SHARE. General features
Removable nose guard Removable windproof chin strap protection Sanitised Dry-Comfort fabrics Micrometrically adjustable strap retention system Fully removable and washable 3D inner liners
Visor
Visor mechanism with PVS system (Perimetrical Visor Seal) for improved seal and protection against draughts and noise thanks to the seat for the visor edge New XQRS (X-tra Quick Release System) for tool-free removal and replacement of visor in seconds. GT2 (sizes ML-L-XL-XXL) and GT2-1 (sizes XS-S-MS) visors in scratch resistant and anti-fog polycarbonate with 100% UV protection Integrated removable Sun Visor (ISV) with scratch-resistant visor with tool-free replacement system
Exterior and interior shell
2 sizes of HIR-TH external shell (High Resistance Thermoplastic Resin) Inner EPS shell in 4 sizes Inner shell in EPS in 4 sizes, shell and EPS dimensions optimised using the FEM (Finite Elements Analysis) system
Ventilation
Ventilation system designed and optimised in a wind tunnel, comprising 4 front vents (3 at the front and one on the chin guard) and 2 rear extractors
Accesories
Anti-theft ring on strap