The Carver T186-600 Standard-Duty Bar utilises the same jaws as its rack clamp equivalents. It can be used either for clamping or jacking apart. Size: 60cm (24in).
These Forgefix Pozidriv Self-Tapping Screws have countersunk heads and are Zinc Plated for increased resistance to corrosion. They tap their own thread in to a pre-drilled pilot hole in sheet or solid material. They are single threaded to resist pull-out. APPLICATION:Ideal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. Countersunk heads are designed to sink flush with substrates to leave a smooth surface finish.Self Tapping Screw Pozi Countersunk ZP 3/4 x 6 Box 200
A quick and easy way to cut clean square holes in sheet metal up to 16 gauge. The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.All punches boxed singly without spanner, which should be ordered separately. Size.19.0mm.Square.Spanner Operated 5/8in AF.
The Zarges K470 Aluminium Case is a high-quality aluminium universal box. The lid has a stainless steel hinge strip, two lid straps and foamed seal all round. The case has cast-aluminium stacking corners, and a high level of stability due to 3 fully-welded aluminium profile frames. Ergonomic and durable, it has C fasteners for at least 20,000 operating cycles, and profile-section joints that are fully welded. The snap fasteners can be secured with a plug lock, have lead seals, and provide protection against bursting open. They can also be sealed by a padlock (Max shackle thickness 6mm). Ergonomic handles provide comfortable handling, with loads of up to 50kg. Also has ergonomic heavy-duty sprung drop handles. The clearance dimensions are approximately 30mm less than the inside dimensions. All-round beading and corner beads give even more durability. Comes in 11 standard sizes. Customised sizes available.Zarges K470 Aluminium Case. Internal length: 550mm. Internal width: 350mm. Internal height: 150mm. External length: 600mm.External width: 400mm.External height: 180mm. Volume: 29 Litres. Weight: 4.2kg.
