Hammerite Stonechip Shield protects surfaces from Stone Chip Damage, Salt, Damp & Rust. It is tough and durable and remains flexible after application. It will not crack or peel. It is easy to apply, with a non-drip formulation, and is overpaintable with most top coats. It is ideal for sills, spoilers and lower body panels of vehicles. Specification: Colour : White Size : 600ml Aerosol
Quantité:1pc; Type:Unique,Ustensiles pour fruits légumes; Application:Pour légumes,Pour Fruit; Matériau:Polyester; Type d'élément:Ustensiles pour fruits légumes; Caractéristiques:Economique; Dimensions nettes:31; date d'inscription:05/29/2019
Master Lock offers a complete range of hasps including these hinged hard wrought steel hasps, which are more flexible than standard hasps (for angled use). When used with a padlock they are a great deterrent to theft and opportunist thieves. These Master Lock hasps also have high security boron padlock eyes for strong cut and pry resistance and hidden hinge pins for added security. Suggested Uses: Sheds, doors, storage containers and cellars.The Master Lock 720EURD has the following specifications: 160mm hard wrought steel single hinged hasp - boron padlock eye accepts shackle diameters up to 12mm - Includes fixings
The Forge Tubular Mortice Latch for internal doors can be used with any lever latch handle, lever on rose handle or door knob. Supplied with screws and fitting instructions.Fitting Instructions:1. Mark a height line on door face and edge as well as a centre line on door edge.2. Drill a Ø23mm hole into door edge to accept the latch body, and a Ø19mm hole in door face for the spindle bar measuring from the door edge (43mm for 65mm latch, 60mm for 80mm latch).3. Fit latch and use a pencil to mark around the faceplate. Chisel out so the faceplate lies flush with door edge.4. Transfer the height line onto the door frame and mark a vertical line at half the door thickness from the door stop.5. Drill a Ø16mm hole, 10mm deep at this point and square out with a chisel. Position the striking plate over this hole, mark around with a pencil and chisel out to lie flush.Case size: 65mm (2.5 inch). Backset size: 44.5mm. Forend finish: Nickel. Supplied with matching screws, face plate and strike.
