Free
Support
These Forgefix Set Screws are made from grade 8.8 steel and are zinc plated for increased resistance to corrosion. They are fully threaded and conform to DIN 933 standards.Can be used with many Nut types and washers. APPLICATION:For fastening together numerous types of material or to be fastened in to pre-tapped holes.Widely used in many engineering applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.High Tensile Set Screw ZP M8 x 90 Bag 10
Stahlwille Series 49 INHEX Sockets have 3/8in square drives and are suitable for socket head/hex head screws. Made from chrome alloy steel and chrome plated. Manufactured to DIN 7422 standards. Overall length: 52mm.Metric sizes. MADE IN GERMANY.Stahlwille In-Hex Socket 3/8in Drive. Size: 3mm.
The Bahco Screwdriver for Pozidriv head screws. The double shape handle allows for optimum grip and maximum torque power. Permanent colour codes at both ends of the handle, for a quick identification of the tip. The blade tip is made from high performance alloy steel. Chrome plated and entirely hardened. Black finish tip for higher accuracy. The size and part number are laser branded on the blade for easier identification The Hexagon profile blade and bolster allow the use of a wrench for jobs that require more torque. The blade continues through the handle with no loss of hammer blow energy. Metallic cap gives protection during jobs requiring high impact. Conforms to ISO 8764. Colour coded for quick identification of tip type: Yellow: Slotted.Red: Phillips.Blue: Pozidriv.Green: Torx.Purple: Hexagon (Nutdriver).Bahco Tekno+ Through Shank Screwdriver. Pozi Tip PZ3 x 150mm.
The Britool 1/2 inch drive 12-point sockets (metric) are crafted from chrome vanadium steel and finished in high chrome. The OGV® profile allows tightening torque to be applied to the sides rather than to the angles of the nut. This product is for manual use only. ISO 2725-1, DIN 3124, ISO 1174-1, ISO 1711-1, ISO 691.The Britool BRIE117054B Socket 12 Point Standard 1/2 inch Drive 11mm has the following dimensions:Size: 11mmLength: 38mmWeight: 50g
Paslode IM65 chisel point brads for Impulse IM65 F16 gas brad nailer. Electro galvanised light duty protection F16 gauge lost head 1.65mm wire brads glued, supplied with Paslode Special Impulse gas fuel cells which drives up to 1,000 brads per cell.Electro Galv: Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7µm.
This Forge traditional silent Cabin Hook is suitable for heavy-duty applications. The tight fitting hook and eye prevents movement hence the silent application. Made from solid brass and supplied with all fixings and fitting instructions. Fitting Instructions:1. Place cabin hook in the desired position, and mark fixing holes with a pencil.2. Use the screws provided to secure in place, additional fixings may be required for brick or plasterboard surfaces.3. Place the keep on the hook end and position so that the door is secured as desired and screw into postion.Finish: Brass. Size: 152mm (6 inch).