Forge Cabin Hook Silent - Brass - 152mm 6in

The IRWIN Marples MS500 Series All-Purpose Chisels with ProTouch Handle. These chisels have a large metal striking cap to withstand hammer impacts, prolong the life of the handle, and prevent mushrooming. ProTouch handles are designed to provide extra comfort, grip, and also reduces vibrations and reduces hand fatigue. One-piece blade forging gives added strength and durability. Made from special tool steel which ensures a much sharper cutting edge for quicker and easier operation. A special hardening process gives the blade a longer lasting edge - less time spent re-sharpening. The blade is hardened to the last inch giving more working chisel for your money. Every chisel is honed and sharpened ready for use out of the packet - to save you time and effort. Avalible in the following sizes: MARS50014: 6mm (1/4in).MARS50038: 10mm (3/8in).MARS50012: 12mm (1/2in).MARS50058: 16mm (5/8in).MARS50034: 19mm (3/4in).MARS5001: 25mm (1in).MARS500114: 32mm (1 1/4in).MARS500112: 38mm (1 1/2in).MARS5002: 50mm (2in). The following sets: MARS500S3: 12, 19,and 25mm (1/2, 3/4 and 1 in)MARS500S3SS: 13, 19 and 25mm (1/2, 3/4, and 1in) (sharping kit inculded). MARS500S5W: 6, 10, 12, 19, & 25mm (1/4, 3/8, 1/2, 3/4, and 1in)MARS500S6: 6, 10, 12, 19, 25, & 32mm (1/4, 3/8, 1/2, 3/4, 1 & 1 1/4 in).1 x Marples MS500 Series All-Purpose Chisels with ProTouch Handle 12mm (1/2in).

The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.