Features Waterproof, windproof and breathable because of the Z-Liner membrane Removable thermal lining with inside pocket and phone pocket Ventilation zippers on the arms, front and back 600D polyester cordura Napoleon pocket behind the front flap Short connection zipper 2 Waterproof outer pockets Removable soft protection at shoulders, elbows and back Scotchlite reflective stripes Adjustable on the arms and waist
Komfort/Ausstattungtemperaturregulierend, kühlt im Sommer optimale Atmungsaktivität nahtlos verarbeitet in 3D-Stricktechnologie (seamless) bakteriostatische Wirkung, antibakteriell und geruchsneutralisierend durch SILVERPLUS®-Ausrüstung MaterialHeld-Strechfit
Technical Specifications Made of synthetic leather Adjustable and replaceable straps Reinforced ankle and heel Rubber sole Replaceable Toe Slider Shifter pad
The Assen is a two-piece performance suit that excels on track and road. Tutu cowhide leather integrates the increased protection of EN 1621.1 Level 2 armor throughout, including a new shoulder design with replaceable aluminum armor plates. The advanced comfort features include S1 bielastic fabric inserts for an agile ride. The result is reduced rider strain for increased concentration, performance and riding pleasure. Ergonomy Aerodynamic spoiler Calf zip Collar with elasticated insert Elasticated inserts Elasticated fabric inserts Features Interchangable knee sliders Material S1 bielastic fabric Tutu cowhide leather Shock Performance 10mm high resistant jacket-trousers connecting zipper Composite protectors certified to EN 1621.1 standard Level 2 on elbows Composite protectors certified to EN 1621.1 standard Level 2 on knees Composite protectors certified to EN 1621.1 standard Level 2 on shoulders Pro-Shape soft protectors certified to Standard EN 1621.1 on hips Replaceable aluminum plate on shoulder Suit certified to Cat. II - Directive 89/686/EEC Thermoformed shoulder covered with Tutu leather Temperature Breathable Nanofeel® liner with silver ion treatment
The Forcefield Upgrade back protector inserts are designed to replace existing back protector inserts and comply with the EN1621-2: 2003 Level 1 standard. With Nitrex® a unique high-tech shock-absorbing material, energy can be scattered and absorbed, and evenly distributed over the Nevertheless, the protector is flexible and comfortable. The materials used can withstand repeated impacts. A combination of technology and Multi Nitrex layers allows Forcefield to manufacture more lightweight and flexible protectors. This allows the body to move without being restricted. The unique triangular Nitrex grids have been designed to allow breathing holes at the base for breathability, and this also reduces weight. Features Approved to: EN1621-2: 2003 Level 1 Protector strength: 15.5 mm
MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows. OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation. The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471 CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet. INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part. INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER: Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation. The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses. weigth: ca. 1000gr
Description:Anti smashing, anti lockpicking, anti hydraulic,anti sawing and cuttingHeat treatment processFoldable and convenient Eight section alloy, high anti-theftPassword lock design, never afraid of losing keysABS material lock body prevents it from scratching the bicycle frameSpecification:Material: ABS Optional Color: Black, YellowSize: As picture showsFitment:Universal fit for vehicles.Note:1.Check if the numbers are aligned with the raised strip when setting the password and do remember it.2.After inserting the lock cylinder dial the numbers randomly.3.When setting the new password, with the password plate downside and you can get the password aligned with the raised strip.Package Included:1 X Lock1 X Lock Rack1 X Fixing Strip1 X Fixing Bolt1 X Hexagon Socket Screw
