Gato Cachorro Arreios Respirável Retratável Treinamento Xadrez Malha Azul Rosa claro Preto

4 UNIDS 65mm neumático de camión militar para 1/16 WPL B-14 B-24 B-16 B-36 C-14 C-24 RC Car

Reely Kabinenhaubenverschluss (L x B x H) 23.5 x 13 x 8 mm (1612177)

Viserion Egg Prop Replica from Game Of Thrones. It is made by Noble Collection and is approximately 20 cm (7.9 in) tall

Catégorie:Robes; STYLE:Soirée Cérémonie; Genre:Filles; Matériel:Dentelle,Organza; Couleur:Jaune; Y compris:Robes

Corona R4DM-SB 2.4G 4CH DMSS Compatible Receiver With S.BusDescription:The Corona R4DM-SB is a 2.4GHz DMSS compatible receiver that is designed to use with JR DMSS 2.4GHz transmitters, such as XG6,XG7,XG8 ,XG11 and XG14 under DMSS protocol mode.Specification:Brand Name: CoronaItem Name: R4DM-SBChannels: 4Modulation: DMSSBand: 2.4GHzWeight: 7gVoltage Range: 3.6 ~ 8.5VOperating Current: 60mA max, 35mA under loadOperating Temperature: -10~70 degrees CLatency: 13 ~ 14msSensitivity: -96dBmFeatures:Full range receiver4 Channels - throttle, aileron, rudder, elevatorSupports S.BUS connectivityFor use with JR DMSS transmittersLightweight and compact weighing in at just 7 gramsFail safe programmableBind Procedure:Turn on the DMSS transmitter, leave it 0.5M~1M away the receiver.Connect a shorter on CH2 of R4DM(signal and GND) when bind with XG7; and connect a shorter on CH3 of R4DM when bind with other transmitters.Connect the battery to the receiver(CH1 or CH4 of R4DM) while pressing down receivers button.Red LED light on and Green LED off when searching signals, and turn to Green LED light on and Red LED off indicate bind is succeeded.Fail-safe Setting:R4DM set failsafe on the DMSS transmitter just like the operation of the JRs DMSS receivers. We highly recommend you set failsafe feature while flying your models. An example of a useful Failsafe setting would be to shut down the models throttle, so that it does not fly or drive away uncontrolled.Special/Normal Mode Switch Guide: If you

5X Gear Box 720 Coreless CW Motor + Propeller Combo Set For RC Models DIYDescription:Item:MotorPropellerPropeller Length:about 138mmPropeller Aperture:0.8mm(tight)Motor: 0720 Motor(7*20mm)Voltage:3.7VUsage:for RC ModelsPackage Included:1 x 0720Motor+Propeller Combo