Free
Support
Acerbis X-Factory HandschützerGeschlossener Handschutz Stahlbar auf der Oberfläche in verschiedenen Farben gedruckt Anticorodalarmbänder, um den Handschutz am Lenker zu befestigen Stahlexpander für engere Befestigung und gegen Drehung im Falle eines Aufpralls Doppel-Injektionsabdeckungen Anwendung: auf Lenker mit Innendurchmesser von 13,5 mm bis 16 mm und Außendurchmesser von 22 mm bis 28 mm
Description:1. Luxury premium silver color gives your car key a unique stylish look.2. Use the advanced environmental protection TPU as raw materials, can make small stretching, can restore after extrusion, surface through the multi-layer vacuum plating, to keep the color gorgeous for a long time.3. Protect your Benz key from scratches and many other damages.4. Easy to install and clean.Specifications:MaterialPremium Soft TPUColorSilverSize5.5x4x1.2cm / 2.16x1.57x0.47inchWeightAround 55gNote:1. The pictures are reference only, the actual products shall be orevail.2. Please allow 0.5-1cm differs due to manual measurement.Package Included:1 X Key Fob Holder Cover
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.
Specifications:- Color: White with Black, Black with Orange, Black(Option)- Material: ABS (Acrylonitrile Butadiene Styrene)- Filter Material: HEPA- Power: 120 W- C igarette lighter Length: 5m- Size: Approx. 39 x 11 x 9cm / 15.35 x 4.33 x 3.54Features:● WetDry Using● HEPA FILTERS EFFCIENTLYDouble filtration, and detachable that can be washed repeatedly.● STRONG SUCTIONHigh vacuum density, strong suction force, easy to solve the problem of garbage in the car, to make the car environment healthier.● Mechanical damping noiseHeat dissipation, make it work steadily, low noise, durable to use.● Different nozzles with different requires● It is suitable to clean the upholstery of the car, or the suede seat cover, the trunk carpet and so on.Package Included:- 1 x Car Vacuum Cleaner- 1 x EVA Flexible Pipe- 1 x Suction Nozzle- 1 x Elliptical Brush- 1 x Brush Connector- 1 x Flat Nozzle Joints- 1 x C igarette Lighter Power Supply Cable- 1 x Manual
Imperméable et respirante avec insert intégré Fermeture avec lacets, poche sur la langue pour stocker les lacets, caché des oeillets 2 paires de lacets livrés: 1 noir et 1 en contraste Facile à mettre grâce à une fermeture zippée sur la face interne Bande Velcro sur le devant pour un bon maintien de la cheville Semelle extérieure exclusive anti-dérapants Semelle intérieure antibactérienne Préformées pour s'adapter aux repose-pieds renforts internes et externes sur le renfort malléole et carbon-look sur sélecteur
formulated with raw coconut sugar to exfoliate and polish skin with coconut oil to deeply moisturise and soften the skin monoi oil hydrates and pampers skin peppermint oil invigorates and stimulates skin no parabens, phthalates, mineral oil, gluten, sulphates or dyes