16 gauge finish nails, which are compatible with: Tacwise Air Powered Nailers: DFN50, DFN50WHH and FFN64LHH.Tacwise Battery Powered Nailers: Ranger 2 16G Nailer.And all other nailers that take 16g straight finish nails.
The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.
This hacking knife has a steel blade with twin leather scales riveted to the shaft. It can be struck with a hammer to remove old putty from window frames. Size: 4.1/2in.
The Byron 7960B/7960C/7960 surface mounted bell push is illuminated and can be connected to all wired Byron doorchimes. 7960B: Brass Finish.7960C: Polished Chrome Finish.7960: Brushed Nickle Finish. The Byron 7960BN Wired Bell Push has the following specification: Colour: Brushed Nickel.Weight: 100g.
The DEWALT FlexVolt XR Slide Li-Ion Batteries stand at the forefront of cordless technology. They are the world’s first convertible 18/54 Volt batteries, offering unprecedented levels of power. Provides the unique ability to power heavy-duty construction power tools whilst still being compatible with existing DEWALT XR 18 Volt products and offering increased run time.It offers users increased run time, over any of the 18 Volt XR 4.0Ah or 5.0Ah Li-Ion batteries.
The ALM Manufacturing Metal Blades to suit various Flymo models.The ALM Manufacturing 33cm (13in) FL332 Metal Blade to suit: Flymo: Hover Compact 330, Compact 330. Compares to FLY027.
The ABUS 41 Series laminated steel padlocks are made up from individually plated laminated steel sections with the bottom most plate hardened. The laminates individually refined with the new 'Etrena' treatment process for optimum protection from corrosion offering up to 40 years weather protection. The rivets in the outer laminates are compressed to protect against the rivet heads being knocked off. Precision pin tumbler cylinder protected against drilling and leverage. Where to use it: Medium security requirementThe cylinder can be re-keyed to match an existing key (Keyed Alike). Overall width: 44 mmOverall height: 60 mmOverall depth: 26 mm Shackle width: 18.5 mm I.D.Shackle height: 20 mmShackle Dia: 7 mm
