BROOKS Flyer-Honey

Chaser-X is the third Arai helmet that makes use of the new VAS (variable Axis System) technology that offers a significant larger and smoother shell area above the SNELL test line greatly improving the important helmet glancing off performance. The Chaser-X makes use of an also completely new ventilation system derived from the RX-7V, instantly recognizable by the large, single intake duct on top of the helmet. This Top Ventilation System is derived from the RX-7V diffuser system. The replaceable interior is lined with an anti-microbial fabric. The Chaser-X features FCS (Facial Contour System) and a fixed, non-retractable mini chin cover. The chin vent is also new, while the Formula One developed visor lock system is the same as used on the RX-7V. All Chaser-X helmets come with a standard Max Vision visor with a Pinlock inlay lens separately packed in the box. Chaser-X Ventilation: New system The Chaser-X features an exclusive ventilation system that is unique to this model. It is instantly recognizable by the large intake and exhaust duct on the front part of the helmet. The large inlet allows generous amounts of cool, fresh air to enter the helmet, assisted by the two inlets in the large single frame rear duct. The exhaust function of the large front duct keeps working when the intake is closed. The two small exhaust vents on the back of the helmet help to quickly dispose hot, warm air from the helmets interior. Shell Construction SFL Special Fibre Laminate Strict quality controlled construction using special fibre layers, crowded with fibres right to the shell surfaces and bonded with special resins formulated by Arai, to disperse impact energy over the widest possible area – the shell’s main job – through strength, structural integrity and impact flexibility. Variable Axis System (VAS) With VAS, the visor mounting position is lowered, yielding an average of an additional 24mm across both temple areas, in pursuit of the ideal smoother shape that increases the ability of glancing off energy. As a result, this has made it possible for more of the shell to be smoother along and above the test line of the Snell standard. Ventilation: Free Flow System (FFS) Creates airflow under the helmet that reduces wind noise and turbulence while increasing the exhaust of hot air. Front Ventilation: Center top vent The new Top Vent provides 11% more airflow than the previous Vent. The new bigger switch makes opening and closing easier. The new Top Vent has three positions, closed, half open and fully open to adjust the airflow and prevent water intrusion when fully closed. Front Ventilation: Standard brow vents Fresh air can enter directly to the forehead area without the need for holes in this critical area of the shell and impact absorbing liner. For specific models the ventilation is extended to the temple area. Front Ventilation: Three position chin vent Three-position chin vent helps in demisting the visor and offering fresh, cool air to the rider. Rear Ventilation: Neck exhaust vent To enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet. Rear Ventilation: One-piece rear exhaust Extracts more hot air from the helmets interior and improves aerodynamics. Rear Ventilation: Side exhausts Produce low pressure behind the rear vent for better hot air extraction. Integrated in the shell for better aerodynamics, reduce wind noise and prevent buffeting at speed. Inside, a small foam dam helps to absorb and diminish excessive noise, without reducing ventilation performance. Aerodynamics: Fixed Chin Spoiler Helps minimize wind noise and also aids with the extraction of hot air from the face area. Provides additional deflection of road debris away from neck. Depending on the model the Chin Spoiler is retractable Visor: VAS Max Vision Visor with De-Mist option VAS MAX Vision shield is standard to provide better visibility in all seasons and for all types of riding. Comes standard with Clear anti-fog Pinlock insert to be installed as needed. Visor: New shield latch system Borrowed from our F1 helmet, completely modified 3D moving new shield latch mechanism secures the shield like never before, but operates smoothly with an intuitive fluid – one finger operation – even with gloves. Visor: Pinlock insert lens included Effectively prevents misting and fogging of the visor, even under extreme wet and damp conditions. May be cleaned and changed easily. Interior: Antimicrobial Liner New exclusive liner with antimicrobial stays fresher between cleanings. Interior: Replaceable Cheek pads/Ear cups Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Replaceable Interior Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Speaker pockets Build in communication systems are popular, but the problem is often that the room for a speaker is limited or just not present, causing unpleasant pressure points. The speaker pockets, offering room for mounting speakers without effecting comfort or fit. (Speaker not included). Interior: Facial Contour System (FCS) To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System (FCS) works with a foam spring support in the cheek pad that compresses and rebounds, providing the necessary support without excessive pressure. Interior: 5mm ’’Peel Away’’ Ear cups/Cheek pads Giving even more ability to craft the perfect fit and comfort, the cheek pads now feature a 5 mm peel away layer for added room if needed. Interior: Thin centre pad for more room in front area The result is more room around the nose and mouth area enhancing the famous Arai fit and comfort even more. Approval: ECE 22-05 The most common helmet certification internationally, required by over 50 countries worldwide. Five times inspected Each Arai helmet goes through five separate quality-control depart­ments: after the shell is made, after painting and graphic completion, after assembly and two in-process inspections. Washable interior The premium quality interior of any Arai helmet can be easily cleaned, in place, with mild soap and lukewarm water. Handmade It can take up to five years for our experts to earn the right to create an Arai shell. Each shell can take up to 27 steps and to build one Arai helmet will take about 18 man-hours. All-day comfort All-day comfort with the Arai interior fit and shape together with the finest liner materials and the extensive ventilation system. And thanks to the perfect balance and weight distribution of the helmet, you hardly notice you are wearing an Arai. Penetration tested All Arai helmets are penetration tested, although not required by European helmet standards. The Arai penetration test is performed with a 3kg test cone that strikes from a height of 3m on the helmet. Double-D ring device The flat and D-shaped rings fit smooth against the chin. No moving parts, no corrosion problems and just pulling the tab is enough to loosen the fastener. Smooth shape, better protection The smooth outer shell of Arai helmets is designed to glide without unnecessary resistance. You don’t want to decelerate your helmet more than necessary. That’s why all Arai vents and ducts are designed to break off during an impact. Hard outer shell, soft inner shell Arai uses a very hard outer shell to spread impact forces and a soft inner shell to absorb remaining energy. The multiple-density EPS inner shell is made using a unique technology of combining three to five densities in various areas as a single component. Organic shape The organic shape of an Arai outer shell offers a more natural appearance, seals better and conforms more to the head’s natural shape for improved comfort, fit and to help minimize wind turbulence. 5-year limited warranty All Arai helmets are warranted against defects in materials and workmanship, and are serviceable only for the properly fitted first user for 5 years from date of first use, but no more than 7 years from date of manufacture. Different outer shells Unlike many other manufacturers Arai provides one size outer shell for each two-helmet sizes for most models. Together with different shaped outer shells for different models it is almost impossible not to find the fit you are looking for. Arai In-house test This Arai helmet is designed to meet the stringent Arai In-house standard requirements, in addition to mandatory standards such as ECE 22-05 and voluntary standards such as SNELL M2010.

Track cogs are designed to spin onto standard ISO-threaded (1.375" x 24tpi) hubs, so they will work with most English, Italian and Japanese hubs, including the Surly New track hubs. The thread base is 7.4mm wide for maximum thread engagement while maintaining enough room for a track lockring to thread on. Like our cassette-splined cogs, these are made from machined, heat-treated and chrome plated SCM415 CroMoly steel, so they are tough and long lasting. Track cogs are available in either 3/32" or 1/8" tooth thicknesses and in every size from 13-22t.

Shell
ECE 22.05 weight 1400 ± 50 KPA 3 Shells Oval
Visor
Twin Shield System Quick Release System Scratch Resistant UV Resistant Fog Resistant Anti Fog System Max Vision
Comfort
Removable & Washable Breathable Hypoallergenic Laser-Cut Foam Chin Curtain Breath Deflector Magna-Tech Liner Ready for LINKIN Ride Pal
Security
Steel Quick Release Buckle Emergency Release System Reinforced Chin Strap Metal Security Plate Reflective Safety Patch Multi-Density EPS Neck Roll
Ventilation
Channeled Ports Top Vent Chin Vent Exhaust Port
KPA A proprietary blend of polycarbonate, space age thermoplastics and additional materials specifically formulated by LS2, KPA (Kinetic Polymer Alloy) Offers ultra-light weight and high penetration resistance, but with some flexibility for the ultimate in energy dispersion. This special formula meets both ECE 22.05 and DOT requirements. Twin Shield System LS2 s drop-down sun shield helps protect the rider s eyes from bright sun, and moves up and out of the way quickly and easily when entering dark tunnels, offering a more comfortable riding experience. Magna-Tech Liner LS2 use a small magnet to hold the neck roll securely in place while riding. Emergency Release System The emergency release system allows emergency responders to remove the cheek pads from the helmet, allowing extra space to remove the helmet with minimal movement of a fallen rider s head and neck. It is best to have someone hold the helmet to keep it from moving as you remove the pads. Slide your finger into the red loop and pull carefully, slipping the pads free. Slide the cheek pads over the straps and pull them away from the helmet. Metal Security Plate This small metal triangle is an LS2 exclusive feature and reinforces the attachment of the chinstraps to the shell for extra strength. Reflective Safety Patch To increase rider safety at night or in low visibility conditions the neck roll has a reflective safety patch that glows in the light of other vehicle s headlights.

The SP120 LITE range is a high performance protective motorcycle jean, tested to the incoming en17092 standard (currently in draft). Our SP120 LITE range has achieved the AAA rating (120KPH) for abrasion resistance. Reinforced with Covec’s new SP120 LITE liner, the ladies Fury Jegging is an ultra-lightweight protective motorcycle skinny jean. The Fury Jegging is extremely light, weighing only 480grams a pair and perform to the AAA rating for abrasion resistance. The Fury jegging is available as a high waisted, skinny stretch denim in a dark indigo blue. We have optimised the ride height of the waist to ensure the best coverage, comfort and optimal fit on and off the bike. Fashion is achieved through the slim form hugging fit through waist and leg. A wick away mesh liner is included, as well as CE level 2 knee armours and hip armour pockets for optional hip protectors, designed to fit Covec’s range of impact protectors. Ideal for hot and cold climates, Covec’s SP120 liner keeps you cool in the summer and warm in the winter. As with all our products, Bull-it jeans have a shower-resistant finish. Features
Covec SP120 LITE liner (AAA achieved for abrasion) Covec thermal barrier inside – prevents heat transfer from road friction Side and rear seam construction triple stitched CE level 2 knee armours as standard Knee and hip armour pockets 2 front pockets legging design 3 leg lengths, short, regular and Long shower-resistant finish all over

Zugeschnittene Form eliminiert gefährliche Kanten. Der Stahlrahmen ist maßgefertigt für die drei Plattformen . Mittelstück besteht aus massiver Eiche. Zum Schutz besteht die Plattform aus sechs Schichten Polyurethan. Inlay Plattform erlaubt Studios eine optimale Nutzung des Raums. Jede Plattform ist 9,5 cm dick, mit den Maßen 101 cm x 152 cm. Rack im Lieferumfang nicht enthalten.

Schmaler Schnitt und ein tolles Tragegefühl für Schnelligkeit beim Spiel! Das Nike Academy 18 Dry Jacket Women bietet einen optimierten Look und ein tolles Tragegefühl fürs Training oder Warm-Up vor dem Spiel. Das Nike Dry-Material sorgt für Feuchtigkeitsregulierung, während praktische Details wie seitliche Reißverschlusstaschen und ein Kragen mit Mesh-Futter volle Konzentration auf die Performance ermöglichen. Größenauswahl-Hilfe: Model mit 170 cm Größe und 60 kg Gewicht trägt Größe S Größenauswahl-Hilfe: Model mit 161 cm Größe und 72 kg Gewicht trägt Größe LEigenschaften Jacke: Material: 100% PolyesterPassform - Fit: Körpernahe PassformGrößenflag: Fällt normal ausPflegehinweise: Maschinenwäsche, keinen Weichspüler verwendenNike Dry-Material Dri-FIT leitet Schweiß ab, hält Dich angenehm trocken und sorgt für Tragekomfort: Schneller Feuchtigkeitstransport nach außen. Hält den Körper angenehm trocken. Das Dri-FIT Funktionsmaterial sorgt für raschen Feuchtigkeitstransport von Ihrer Haut zur Gewebeoberfläche zur Verdunstung und hält so Ihren Körper angenehm trocken Tailliert und hinten länger geschnittenDer schlanke, schmal zulaufende Schnitt sorgt für einen optimierten Look und ein tolles TragegefühlHochgeschnittener Kragen mit Mesh-Innenfutter schützt Deinen Hals vor Kälte Durchgehender Reißverschluss mit Reißverschlussgarage als Schutz gegen Reibungen am HalsRipp-Bündchen an den Ärmelenden verhindern ein Verrutschen der Jacke beim LaufenSeitliche Reißverschluss-Taschen verwahren Deine Kleinigkeiten: An beiden Seiten jeweils eine mit Mesh-FutterKontrast-Einsätze an den SchulternGestickter Swoosh auf der rechten Brustseite