Segura Hilton Textiljacke Schwarz 2XL

Mainline editions come with matching colored cheek pads and liner Helmet Technology
Shell Design: An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy. This helmet is specifically designed to fit adolescents and small adults Ventilation: 11 points of ventilation with chin, side, forehead, top and rear vent. 3 intake vents and 8 exhaust vents Google Guide on Eyeport Trim: Goggle strap grabbers Visor: A removable and adjustable (50mm) screw-on visor This helmet model meets or exceeds both ECE 22.05 and DOT FMVSS-218 motorcycle helmet safety standards Retention system is a race approved Double D-RING A clear coat finish to protect paint & graphics A large-size FX-17 weighs 1.55 kg or 3.42 lbs
Removable, washable and custom sizable Interior AFX helmet liners and cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable and washable. The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness and cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner and cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block.

Helmet Shell & EPS Size XS-M L-XXL



XS S M L XL XXL

Check Pad Thickness (mm) 28 24 20 28 24 20

Comfort Liner Thickness (mm) 10 8 6 10 8 6

New Travel Line: good-looking technical luggage that is practical and easy to use for long journeys. Developed with Trail bikes in mind, this tank bag is available with either the Baglocker or universal TAB fixing systems. Features
Capacity: 20 l (expandable + 5 l) Baglocker and universal TAB fixing systems Reflective prints and piping Map holder Side pockets Shoulder straps Rain cover Anti-theft brake lock bag available separately Retention system sold separately

The Varial™ jacket is the latest in hood-rich styles from the ICON 1000 collection. This time we started with a coated nylon chassis and reinforced it with drum-dyed leather paneling, all crafted around a modern jogger silhouette. Ribbed closures, YKK® Aquagard reflective zipper, reflective trims, and serious chest venting keep things legit. Internally the Varial features a full slate of D3O® impact protectors (shoulders, elbows, and back). Lightweight street coverage, this is modern moto outerwear at its finest. Features
ICON® 1000 sport fit Durable textile and leather chassis D3O® removable back, elbow, and shoulder impact protectors - EN 1621-2:2014 / EN 1621-1:2012 Streamlined SPORTCUFF™
Fit Our sport fit jacket is designed with slightly pre-curved arms, comfortable for an aggressive riding position. It is loose without being baggy for increased mobility without the bulk. Waterproofing Our Waterproofing Level 1 will get you through light rain, average snow, and light pressure. Conditions Hot to Mild - Ventilation where you need it results in premium gear with maximum air flow and breathability for hot to mild riding conditions. Waterproof Zipper YKK® AquaGuard® Water Repellent Zipper is a polyurethane laminated tape on a VISLON® zipper. It has great strength and smooth operation. D3O® Impact Protector Package Includes a full suite of industry-leading D3O® Impact Protectors (shoulders, elbows, and back). D3O® unique technologies provide both enhanced protection and a versatile, flexible material for a host of shock absorption and impact protection. Delivering the most flexible and discreet protection on the market, D3O® consistently outperforms traditional foam-based materials.

The Assen is a two-piece performance suit that excels on track and road. Tutu cowhide leather integrates the increased protection of EN 1621.1 Level 2 armor throughout, including a new shoulder design with replaceable aluminum armor plates. The advanced comfort features include S1 bielastic fabric inserts for an agile ride. The result is reduced rider strain for increased concentration, performance and riding pleasure. Ergonomy
Aerodynamic spoiler Calf zip Collar with elasticated insert Elasticated inserts Elasticated fabric inserts
Features
Interchangable knee sliders
Material
S1 bielastic fabric Tutu cowhide leather
Shock Performance
10mm high resistant jacket-trousers connecting zipper Composite protectors certified to EN 1621.1 standard Level 2 on elbows Composite protectors certified to EN 1621.1 standard Level 2 on knees Composite protectors certified to EN 1621.1 standard Level 2 on shoulders Pro-Shape soft protectors certified to Standard EN 1621.1 on hips Replaceable aluminum plate on shoulder Suit certified to Cat. II - Directive 89/686/EEC Thermoformed shoulder covered with Tutu leather
Temperature
Breathable Nanofeel® liner with silver ion treatment

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

Our Heated Golf Softshell Vest is a must for every women on the golf course with a classic cut fit. This golf vest is great worn over a light shirt or under another outerwear piece to keep the chill out. Now you can enjoy cooler weather like never before by turning on the warmth with the touch of a button! Key Features:
Made of lightweight Windshark® 4-way stretch, waterproof, breathable windproof fabric Optimum placement of three heating panels keeps the upper body muscles warm and loose Battery features built-in 4-level thermo-regulating controls Includes one 7.4V rechargeable lithium-ion battery and charger Provides up to 10 hours of comfortable warmth while Elastic underarm stretch panels for added flexibility Conforms with USGA rules


Full Power Setting 135°F = ca. 57°C, lasts up to 2.5 hours

75% Power Setting 120°F = ca. 49°C, lasts up to 3 hours

50% Power Setting 105°F = ca. 41°C, lasts up to 5 hours

25% Power Setting 90°F = ca. 32°C, lasts up to 10 hours