Regista 18 Training Top

3 Paar Socken mit HeatGear® Technologie und ArmourBlock®! Die Under Armour HeatGear Tech Crew Socks 3er-Pack bieten Feuchtigkeitstransport, strategische Dämpfung und ArmourBlock®. Aufgrund der Entwicklung modernster Textilinnovationen und der Einführung neuer Technologien, die zu ständigen Produktverbesserungen führen, steht das Under Armour® Fabric Lab an der Spitze der Performance-Bekleidung. Eigenschaften: 3 Paar Socken sind im Lieferumfang enthalten: Drei Paar in weiß/grauMaterial: 97% Polyester / 3% Elasthan Crew Socke: Die Socke reicht bis über den KnöchelDas Moisture Transport System transportiert den Schweiß vom Körper wegDank der ArmourBlock® Anti Odor-Technologie wird das Wachstum von Mikroben verhindert und so der Geruchsbildung vorgebeugtEine integrierte Mittelfußstütze beugt der Ermüdung des Fußes vorNahtloser Zehenbereich und geformte Y-Ferse bieten eine perfekte, komfortable PassformUnder Armour Logo über der Ferse eingestrickt

Bike Narrow Wide Chainring Crankset Single Chain Ring

Warmth Without the Weight Mother Nature has met her match with this low profile glove engineered to keep you going fast in cooler weather. Get the perfect amount of insulation to block out damp, cool temperatures while maintaining exceptional dexterity and control of your bike. These work well for those cold trail exploring or maintenance days. Features • Adjustable TPR wrist closure with hook and loop backing ensures proper fit • Lightly insulated soft-shell top hand • Moisture-wicking microfiber interior provides the perfect level of insulation • Reflective graphics on top of hand offer a clean look with improved visibility • Single-layer Clarino palm for premium comfort • Silicone printed palm graphics increase grip in damp conditions • Integrated tech-thread keeps you connected with your devices

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety SHELL in TRICARBOCO material, mix of Kevlar, carbon and fiber, joint through resine, hand made, using new technologies with vinilester resin. The INTERNAL POLYSTYRENE produced in 3 sizes to get the best fitting. This characteristic allows a gradual and progressive absorption of the energy produced by the impact. Even if the bigger part of the energy created by the impact is absorbed by the external shell, thanks to its deformation, the role of polystyrene is determinant for the absorption of the residual energy. A diversified density of the polystyrene, permit us to optimize the mechanical performance of the shell/polystyrene. The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Ventilation The internal polystyrene has been studied to work together wityh the air ventilations, put on the shell. The channels allow the perfect inside air flow and at the same time a quick outside air flow from back ventilation. Comfort The CHEEK PADS and the INTERNAL COMFORT shell can be removed, washed and replaced.
They are made of a precious fabric with specific fibers, that offer:
It moves away the body sweat, Keeps rider fresh, dry and completely comfortable, Lightweight, soft and breathable fabric, Performance controlled and certified by ADVANSA.
The cheek pads are easily removable also in case of accident through a red strap which removes the cheek pad even if the helmet is worn by the rider.

Features
Convertible Hook and Loop panels above the knee can be opened to expose air intakes Two zippered pockets for storage Polyester and nylon are combined with double stitch for a pant that is made to last Adjustable side cinches, snap buttons, and ratchet-style closure tailors to the unique build of every rider Abrasion-tolerant materials, durable construction, and full grain leather knee panels provide coverage in crucial areas Refined chassis for increased comfort and performance Interior hip pocket Comfort mesh liner Purpose built TPR Internal gaiter at boot Adjustable snap button ankle closure Reflective graphic accents YKK zippers Sublimated no fade graphics

competitive price ! more discount for more orders ! quality first ! client first ! excellent service ! fast ! mix order available ! Drop available ! Welcome to Retail and Wholesale! You are visiting a professional store. we sell only the quality jerseys. Don`t doubt the prices! Our products will bring great satisfaction to you. We are committed to the most simple buying patterns,! Please support my store and add it to your wish list If you have any problems making the payment, please let me know. We will help you solve the problems.syi