1.5M Exhaust Header Pipe Heat Wrap Manifold Turbo Shields Insulation Roll Tape Motorcycle

Internal certified back protector for Fit for Lady items.
It is certified for heights up to 156cm. Under current legislation, this protector provides protection to all areas of the body, and is therefore suitable for use within the above measurements. The structure of Back Warrior Z64 is a multi layered sandwich of materials, the first one of which is stiff and spreads the shock, while the second and third are progressively softer and absorb the energy of impact. The cubes shaping the inner and outer surface of Warrior Back are able to absorb and additional 20%of impact energy more than a simple plain surface, all while maintaining a great abrasion resistance.
The inner surface has also been shaped in order to guarantee air circulation thus maintaining comfort, especially in warm climates.
The peculiar shape and surface structure also make for a greatly flexible and light protector, easily storable, quick to equip and comfortable for every kind of riding position.
Measures: H 35cm - L 26cm

REVIT TORNADO JACKET Built to be your secret weapon against the heat of summer TORNADO combines durable open mesh panels that flow air better than the competitions, with REViT! styling and features Like all REVIT! jackets, TORNADO is equipped with armor, so you don´t have to sacrifice safety for comfort And for the unexpected shower, or cooler day, a removable 2-layer inner jacket provides both waterproofing and insulation. It´s wearable separately too, for added convenience when off the bike
Outer shell
PWR/shell 750D, PWR/shell mesh, Lorica®, neoprene, Monaco Performance cowhide, polyester dull 450D , polyester rib Insulation detachable 2-in-1 thermal liner & membrane Waterproofing & Breathability detachable hydratex® / G-liner Visibility laminated reflection
Protection
perforated EVA foam, Knox® Flexiform protection, prepared for Knox® Advance X back protector
ERGONOMIC
Fit tour fit , regular, Adjustability adjustment straps , flexisnap UTA /tab, Ventilation ventilation panels Features collar hook , stretch lips , double short connection zipper Pockets inner pockets , slit pockets

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

security
Upper and ankle protection Palm reinforcement Double layer of material
domestic equipments
GE.pro TEX climate membrane elasticated reflective material adjustable velcro closure long cuff
features
waterproof windproof breathable

To upgrade or downgrade the lining of your Arai helmet, you can order the lining in different strengths. To know the strength of your actual lining, please have a look on the label which is fastened on the lining in your helmet.
for Tour-X 4 Inner Lining (100% polyester) easily cleaned

Upper material
full grain microfibre
Lined
lined with a water resistant material coupled with trockenfuss®
Sole
non slip rubber sole
Features
closure with 5 vintage style metal buckles arch area and front featuring a quilted padding pu reinforcement on the front gaiter closure on the calf area nylon inner sole with removable arch support pad