Manguera de jardín con pistola rociadora para riego Manguera de agua expandible mágica para jardinería 175FT

A built-in digital camera with 4x zoom is aligned to the laser measurement device and provides long range targeting, even when the laser dot is not visible. The unique combination of digital Pointfinder and 360° tilt sensor allows measurements which are not possible with conventional distance meters. The DISTO™ D510 uses Smart Horizontal Mode to calculate the correct horizontal distance, taking out the error produced from out of level measurements, allowing measuring beyond obstructions or taking indirect measurements. Bluetooth® Smart technology allows data transfer to smartphones and tablets. In addition to the smart free App Leica DISTO™ sketch, there is also a host of other Apps to allow you to work efficiently and avoid typing errors when recording measurement results. The DISTO D510 kit is also supplied with the following, in a rugged case: Leica FTA360-S adaptor: Sturdy adaptor with fine drive for convenient and precise targeting. The adaptor eases the task of targeting over long distances, and results in minimum discrepancies when taking indirect measurements. Fits all Leica DISTO™ and Lino products with a ¼ “ thread and is designed to be used in combination with the Leica TRI 70 or TRI 100 tripod. Leica TRI 70 tripod: The small portable tripod provides a stable base for more accurate measurements. It is intended for everyday use, features include easy fine adjustment and a bubble level. Extendible length from 0.40 m to 1.15 m. Ideal with the Leica TA360 or FTA360 adaptor. Distance Area & Volume calculation Plus & minus calculation Tilt Sensor (360°) Stake Out Timer Indirect Measurement Pythagoras (3 point) Tracking (incl. min/max) Memory – last 30 measurement recall

Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/2 in Shank.Angle A = 90° D = 12.7 mmC = 25 mm

The Bulldog 1811 Premier Grass Hook is ideal for cutting rough grass and general roadside or field maintenance. The flat blade on this tool is ground on both sides so it can be used left or right handed. Fitted with a handle hook for easy storage. Made In Britain.

These Forgefix flat Bellwire Clips have hardened masonry nails for increased efficiency, and which will fix into timber, blockwork and mortar. The nail should not be hammered directly in brick, and fixing into mortar is recommended. Application:For fitting bell wire cable to timber or masonry in audio, visual and both commercial and domestic cabling.Cable Clip Flat White 1.50mm Box 100

Stahlwille Series 40ADL Bi-Hexagon, extra deep sockets have 1/4in square drives. They come in AF imperial sizes, and are made from HPQ® high performance steel, with chrome plating. The sockets have an extremely high load capacity with exceptionally thin rings and walls. They are free from cadmium and therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is crucial. The sockets are equipped with anti-slip drives which permit high transmission of forces to the lands of the nuts and bolts without damaging them. Manufactured to DIN 3124/ISO 2725-1 standards.Overall length: 50mm. MADE IN GERMANY.Stahlwille Extra Deep Bi-Hexagon Socket 1/4in Drive. Size: 9/32 AF.Overall length: 50mm.

The Laserliner ThermoSpot One is a non-contact infrared device which is ideal for taking surface temperature measurements of all types of materials. It is ideal for pipes, radiators, liquids and hazardous areas such as moving machine parts or live electrical installations. The thermometer has a focusing laser for precise targeting and a hold function which displays the last temperature on the digital LED display. Measured values can be changed to either Centigrade or Fahrenheit. Supplied with 2 x AAA batteries. Temperature Range: -38 - 365°C.Accuracy ± 2.5%.