Free
Support
E-Magnets Shallow pot magnets are low profile for applications where height is limited. They have a clearance hole through and a countersink on the magnetic face to accept a countersunk screw. Maximum operating temperature: 500°C.Material: AlnicoThe E-Magnets 827 Shallow Pot Magnet has the following specifications: Diameter: 29mm (1.1/8 inch). Height: 9mm (11/32 inch). Maximum Pull: 5kg (11 lb).
The Master Lock Aluminium Black Vinyl Cover padlocks are a tough and dependable security solution. With a modern black vinyl finish to the body, they are an appealing solution for day-to-day reliability. Each padlock has a solid body, hardened steel shackle and dual locking levers. A variety of multi-pack options, where all padlocks in the pack open with the same key (keyed alike) are also available. Padlocks are available with 3-pin and 4-pin cylinders and with a variety of shackle lengths for added security and for a wider range of possible application options. The black vinyl cover also helps protect surfaces from scratching. All Master Lock padlocks are supplied with a minimum of 2 keys and a Lifetime Warranty against mechanical failure. Suggested uses: Lockers, trunks, cupboards and sheds.The Master Lock 9130EURTBLK has the following specifications: 2 x 30mm aluminium with black vinyl cover padlocks - 18mm hardened steel shackle, 5mm diameter - 4-pins keyed alike
Cómodo organizador de células de almacenamiento portátil con probador Kit de bricolaje de caja de caja de soporte portátil
These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work, and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.Length (A): 125mm (5 in). Blade length (B): 16mm (0.63 in). Head width (C): 16mm (0.63 in). Head depth (D): 8mm (0.31 in). Tip width: (F): 1.6mm (0.06 in). Cutting capacity: 0.4-2.0mm. Cutting edge: Micro-bevel. The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.
The Makita HP1640 Percussion Drill has the following features ;- Forward/reverse rotation.- Variable speed trigger.- Double insulated. Technical Specifications: Blows per minute: 0-44,800 bpm.No load speed: 0 - 2,800 rpm.Vibration hammer drilling: 19 m/sec².Vibration K factor: 2 m/sec².Input wattage: 680 w.Noise sound power: 103 dB(A).Noise sound pressure: 92 dB(A).Noise K factor: 3 dB(A).Net weight: 2.0 kg.Max in masonry: 16 mm.Max in steel: 13 mm.Max in wood: 30 mm.Supplied with side handle and depth stop
Single or Double white plastic wall sockets. 13 amp rating. Available switched or unswitched.13 Amp 2 Gang switched socket White