Faux Fur Hooded Button Pocket Zip Up Quilted Coat

*Example picture

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

When the memo came through that skulls were no longer cool, we tore it up, laughed, and then put a goat skull on our Merc Cloven jacket. We then drew a pentagram on the floor and chanted out an arcane song to the west wind. Such is the life in the ICON office. If you like goats, you will love this jacket. If you really, really like goats (or sheep), then that’s between you and them. No judgment here. Features
ICON® relaxed fit Stretch woven polyester softshell chassis D3O® removable back, elbow, and shoulder impact protectors - EN 1621-2:2014 / EN 1621-1:2012 Heavy weight ballistic panels, Streamlined SPORTCUFF™
Fit Our relaxed fit jackets are designed with a loose and longer fit so that it can be worn by those with a full frame and over a jacket or sweater. Waterproofing The fabric has a polyurethane coating and contains no exposed zippers, vents, or mesh to keeping you dry in light rain and average snow. Conditions Hot to Mild - Ventilation where you need it results in premium gear with maximum air flow and breathability for hot to mild riding conditions. Construction This hoodie may look casual, but it’s all business. The reinforced soft-shell construction is tough and paired with reinforced Nylon paneling, come through in a tumble. D3O® Impact Protector Package Shoulders, Elbows, & Back Includes a full suite of industry-leading D3O® Impact Protectors (shoulders, elbows, and back). D3O® unique technologies provide both enhanced protection and a versatile, flexible material for a host of shock absorption and impact protection. Delivering the most flexible and discreet protection on the market, D3O® consistently outperforms traditional foam-based materials.

* Tech-Air® 5 is a slim, self-contained wearable airbag vest that can be worn under any proper fitting textile jacket or Tech-Air® compatible jacket. * Tech-Air® 5 offers unrivaled upper body protection, keeping motorcycle riders safe by uniquely covering the shoulders, chest, ribs and full back. * Tech-Air® 5 has Bluetooth connectivity and an accompanying Tech-Air® App, which uses the rider’s phone to display the system’s operational status, battery status and a detailed analysis of a ride. | Article: Alpinestars Tech-Air 5 Airbag Vest, grey, Size S | Article: Alpinestars Tech-Air 5 Airbag Vest, grey, Size S, grey, Size S

Description:1. Sometimes, you may had experience that heat-stopping moment while riding when the handlebar teeter nervously,or even skirr uncontrollably out of your control, you know is not pleasant, if you havent experience, then you should act now before it happens;2. Front Fork Bracket reduces vibration by distributing forces to both sides of fork evenly while cornering,making your riding experience safer and enjoyable;3. All of our Front Fork Bracket has been assiduously researched, tested, engineered and stylishly designed tointegrate with your bike, enhancing stability without affecting steering and handling characteristics.Specification:Item Name: Front Fork BracketColor: Titanium/Gold/Silver/Red/Blue/BlackMaterial: Aluminum AlloyItem Length: 28CM/11inchItem Width: 9CM/3.5inchItem Height: 2CM/0.78inchFitment:For YAMAHA YZF-R3 MT03 2014-2018 2019For YAMAHA YZF-R25 MT25 2014-2018 2019Note:Ensure this part fits for your motorcycle before you place an order.If there is any problems, please feel free contact us, we would be glad to help you.Package Included:1 X Balance Shock Absorber Front Fork Brace

Born from the previous women s glove, Spidi Grip 2 takes all the salient features and elevates them to new standards. Designed on female morphology, as all Fit For Lady products, features silicone inserts on the fingertips to improve grip on the tank of the bike. Features
Cowhide leather 0.7 mm thickness Clarino Palm Inserts in stretch fabric Knuckle protection in shock absorbing material Adjustable Velcro Closure