Do you always find it so a fiddle to put on your textile pants over your normal trousers? Do you drive a lot of commuting? Then the Swift is for you! Thanks to its smartly positioned zipper on the side, you can easily put on the pants to protect and dry at work or at home! Features Made of Poly 600 and R-tech Fixed Raintex membrane so you always arrive dry at your destination Safe Tech protectors on the knee Side Eye boosts your visibility in the dark
MATERIALGewachste Cordura 500 w / a Hand gefertigte Behandlung Miporex Membran Baumwolle / Viskose-Twill-Futter abnehmbare weiche Protektoren an den Knien und Hüften innere Struktur: Herausnehmbares Steppfutter SCHUTZProtektoren mit der EU-Richtlinie 89/686 / EWG und der technische Norm EN 1621-1: 2012 TASCHENZwei Fronttaschen classic FEATURESVersiegelte Nähte Membran Wasserdichter Reissverschluß Reflex-Paspel am Unterschenkel GRÖSSEN: 44-46-48-50-52-54-56-58
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric. Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor. The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part. Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER: Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. Removeable Nose Protector Ventilation The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation. Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.
Description:high performance projector headlightHigh/Low beam effect controlled by driveSuper bright LED Headlight with CCFL angel eyeDevil eyeMake your motorcycle eye-catching both daytime and nightProvides clear vision for driving at night, will not dazzle on-coming vehiclesEasy installationSpecification:Color Temperature of LED: 6000KMaterial: Aluminum + ABSWorking Voltage: 12-80VPower: 30WWeight:200gColor: Type1 Blue + Red + White Type2 Green + Red + white Type3 white + Red + whiteThree function: Hi-beam , Low beam, StrobeWorking Temperature: -40 degrees centigrade to 40 degrees centigradeLuminous Flux: 3000LM/WPlacement on vehicle: frontFitment:Motorcycle Scooter E-Bike ATV ect.Package Included:1 X LED Motorcycle Headlight With Angel Eye
Bringing all the class-leading Tech family performance benefits to a lightweight Enduro boot, the Tech 3 Enduro incorporates a range of protection features into its durable microfiber upper while the specially developed Alpinestars rubber compound all-terrain specific sole provides excellent grip. Features Upper is made from innovative and light microfiber material that is flexible and abrasion resistant. Light microfiber front and rear bellow stretch inserts offer greater flexibility and comfort in key area. Internal toe-box constructed with high-grade synthetic material for high abrasion. Extended PU synthetic gaiter helps seal out excessive water and dirt entry. Contoured TPU calf protector plate, TPU higher medial protector, TPU outer lateral ankle and TPU heel counter offer support and resistance to impacts. Rear TPR gaiter patch applied on top of the TPU calf protector gives protection and comfort on rear flex area. Injected TPU shin plate connected with the TPU medial protector panel, hook and loop grip upper closure, plus TPR flap for broad ranging calf fit adjustment and support. The TPU higher medial external protector is designed with technical texture for improved grip. Bio-mechanical medial blade system allows front rear flex giving support and protection to the ankle. The ergonomic TPU triple buckle straps allow smooth frontal flex from the medial protector to the lateral side without compromising ease of movement. New closure system includes three polymer buckles with an innovative closure system. This closure includes a micro-adjustable ratchet with memory and a quick release/ locking system with self-aligning design for easy, precise closure. The buckles are replaceable. Innovative one-piece TPU injected dual compound foot shell, reinforced by a metal shank inside a co-injected toe reinforcement. Soft foam surrounds the ankles and collar offering comfort and shock absorbing performance. Entire textile lining for more comfort. Replaceable EVA footbed with textile lining on top. Specific Alpinestars all-terrain design sole and high grip rubber compounds. The sole is replaceable. EN 13634:2010.
