Masajeador muscular eléctrico de 12 V Percusión portátil Vibrante Pistolas de masaje potentes Masajeador muscular de tejido profundo de mano para cuello Espalda Hombros Pie pierna

The Faithfull Long Leg Tile Spacers are ideal for most tiling applications. These versatile spacers can be easily snapped when ‘T’ joints are required and may be easily removed once the adhesive is set. How to use: Apply adhesive with a notched edge spreader and secure tile firmly. Position one spacer at each corner of the tile, add more spacers as each new tile is placed alongside. For evenly spaced wall and floor tiles, always use same spacer brand and product code during tiling process. Tiles must be left to set for 24 hours before grouting. Faithfull recommend removing spacers once tile adhesive has set. Please note: Size of spacer may vary slightly to dimension stated. Always use same spacer brand and product code during tiling process as each brand and product is different.Size: 3mm.Pack: Tub of 1,000.

These Britool screwdrivers have a bi material ergonomic comfortable and effective handle. In addition, they have a round chrome plated blade in chrome vanadium steel each with a sand blasted tip. The 8 piece Britool BRIE160907B screwdriver set includes 2 x Parallel slotted screwdrivers 3x50 and 4x100mm2 x Flared slotted screwdrivers 5.5x125 and 6.6x150mm2 x Pozidriv screwdrivers PZ1x100 and PZ2x125mm2 x Phillips screwdivers PH1x100mm and PH2X125mm

3867/1 TS TORX® Bits, stainless Wera Stainless Torsion slotted bits prevent rust on stainless steel fixings caused by contamination from conventional steel tools. Vacuum ice-hardened to the same strength as conventional steel tools, and so suitable for tough, industrial use. Wera Stainless bits feature a unique Torsion zone, extending bit life over standard bits.Use wit Wera stainless Rapidaptor bit holder.Application: For TORX socket screws.1/4in Hexagon Drive, DIN 3126-C 6,3, ISO 1173Tip: TORX, stainless steel.

The Britool 1/2 inch drive 12-point sockets (metric) are crafted from chrome vanadium steel and finished in high chrome. The OGV® profile allows tightening torque to be applied to the sides rather than to the angles of the nut. This product is for manual use only. ISO 2725-1, DIN 3124, ISO 1174-1, ISO 1711-1, ISO 691.The Britool BRIE117054B Socket 12 Point Standard 1/2 inch Drive 11mm has the following dimensions:Size: 11mmLength: 38mmWeight: 50g

Faithfull heavy-duty crowbars, drop forged from high quality carbon steel hardened and tempered at both working ends. Ideal for levering heavy objects, wrecking work and digging, the pinch point end allows easy penetration when breaking hard ground.1 x Faithfull Chisel & Point Crowbar 28mm x 1.5m

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S