Tijeras multifuncionales de alta precisión para jardinería Tijeras de podar manual Rama cortadora para árbol de jardín

Stahlwille Series 40ADL Bi-Hexagon, extra deep sockets have 1/4in square drives. They come in AF imperial sizes, and are made from HPQ® high performance steel, with chrome plating. The sockets have an extremely high load capacity with exceptionally thin rings and walls. They are free from cadmium and therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is crucial. The sockets are equipped with anti-slip drives which permit high transmission of forces to the lands of the nuts and bolts without damaging them. Manufactured to DIN 3124/ISO 2725-1 standards.Overall length: 50mm. MADE IN GERMANY.Stahlwille Extra Deep Bi-Hexagon Socket 1/4in Drive. Size: 9/32 AF.Overall length: 50mm.

Hammerite "Direct to Rust" Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3-in-1 formula, there is no need to use a primer or undercoat...saving you precious time! It forms a superior barrier that not only seals out moisture, but also gives long-lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion-resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Two coats are required and protects up to 8 years. Specification: Colour : Yellow Finish : Smooth Size : 2.5L Coverage : 5m²/L

These Forgefix Phillips, Single Coarse Thread (SCT) Drywall Screws have a black phosphate finish for increased durability. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface. They are supplied collated, with 50 screws per strip and 1,000 screws per box. APPLICATION:Designed for fitting dry lining to studding. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Drywall Collated Screw Phillips Bugle Head SCT 3.99 x 35mm Box 1000

Pistola de tuercas de remache 10 "Herramienta de remachado de remachador ciego de una sola mano Herramienta de pistola de remache

A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.Size 4.0mm (5/32 in)

128mm 5 "HSS Centro de acero de alta velocidad automático del sacador por resorte Pulse marcador Dent Con Impact ajustable y de acero endurecido Cuerpo