The Roughneck heavy-duty plastic hand clips have a robust nylon construction.The pivoting soft jaw pads protect workpieces and the hand clips feature a powerful spring mechanism.The Roughneck ROU38331 heavy-duty plastic hand clip has the following dimensions: 25mm (1 inch)
The DEWALT DCK206M2 Twin Pack, contains the following: 1 x 18 Volt DCH253 3 Mode SDS Hammer Drill that is ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm. The hammer drill has a rotation stop mode for light chiselling in plaster, tiles and render and an impact stop mode for rotary only drilling in wood and metal. It uses 4.0Ah 18 Volt Lithium Ion batteries to deliver high performance, long life and maximum runtime. No Load Speed: 0-1,200/min.Impact Rate: 0-4,500/min with 2.1 Joules.Capacity: Concrete: 24mm, Steel: 13mm, Wood: 26mm.Weight 3.1kg. 1 x 18 Volt DCD785 XR Compact Hammer Drill Driver has an ultra compact, lightweight design that allows it to be used in confined spaces, whilst the intelligent trigger design allows for total control of application. It has a two speed, all metal transmission for increased run time and a longer tool life. Chuck: 13mm Keyless.No Load Speed: 0-600/0-2,000/min.Impact Rate: 0-10,200/0-34,000/bpmTorque: 60Nm, 14 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 38mm 1 x 10.8-18 Volt DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LEDindicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-Ion DEWALT Slide Pack 10.8, 14.4, and 18 Volt batteries.
User Benefits: Safety Paddle Switch. Electronic current limiter for overload protection. Soft start feature. Anti-restart function. Electric brake. Battery fuel gauge. Rubberised soft grip. Automatic Speed Control: Automatically changes the cutting speed according to load condition for optimum operation. High power motor. Equipped with Battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current. Kickback user protection: Shuts down the tool to protect the user if rotation speed suddenly slow down (e.g. kickback). Specification: Voltage: 18v Bore Diameter: 22.23mm Max Wheel Thickness: 6.4mm Noise Sound Pressure: 79 dB(A) Noise K Factor: 3 dB(A) Max Wheel Diameter: 125mm No Load Speed: 8,500/rpm Vibration K Factor: 1.5 m/sec² Vibration Surface Grinding: 6.0m/sec² Vibration Disc Sanding: 2.5m/sec² Net Weight: 2.6kg
The Armogard TransBank™ Hazard Transport Box is designed specifically for storing or transporting smaller quantities of flammables or chemicals. They fully comply with all regulations, built to 30 minute fire resistance. Fully welded and tested sump base to prevent leakage, ventilated to prevent a build-up of fumes with flame arrester gauze. Overcentre catch with padlock facility and finished in bright red with relevant hazard warning signs. External Dimensions: 685 x 480 x 520mmInternal Dimensions: 625 × 420× 515mm.Weight: 29kg.
The Master Lock Excell™ Laminated Steel Padlocks are made with cutting edge technology to deliver unprecedented security. They feature tough cut patented octagonal boron carbide shackles which are 50% tougher to cut than hardened steel, and dual ball bearing locking mechanisms for maximum pry resistance. The laminated steel padlocks are built for strength, with stainless steel and zinc outer components for exceptional weather resistance. They have either a precision 4-pin or 5-pin cylinder and recessed rivets that are chisel resistant. Supplied with 4 keys and a Lifetime Warranty against mechanical failure. Suggested uses: gates, sheds, storage units, fences, containers and chains.The Master Lock M5EURT has the following specifications: 2 x 50mm Excell™ laminated steel padlocks - 38mm Octagonal boron carbide shackle, 9mm diameter - 4-pin tumbler cylinder - dual ball bearing locking - keyed alike
The Dormer P813 Solid Carbide Rotary Burr Bright with pointed tree ball nose geometry for skip flute grinding and increased strength at the centre. With a reduced chance of swarf congestion and improved cutting action closer to the centre. Produces double cuts, making it first choice for general machining. With an improved ease of control, increased metal removal rate and breaks swarf into manageable pieces. They have toughened and hardened steel shanks that provide rigidity and strength. This prevents bending and reduces vibrations for an improved tool life. Ground to h6 (Carbide) and h7 (Steel). Excellent impact strength that is able to withstand high forces and to withstand higher temperature without failing. Special brazing elements provide excellent braze strength.The Dormer Solid Carbide Bright Rotary Burr Pointed Tree has the following specification: Diameter: 9.6mm.Shank Diamter: 6mm.Working Length: 19mm.Overall Length: 64mm.
