Monument 2050L Gas Meter Radiator Bleed Key

The Halls Handiburr Rethreaders are based on a high-speed steel tap permanently fitted with a handle. They are designed principally for cleaning out the fixing holes in socket switches or conduit boxes as these often have malformed threads or are blocked by plaster or cement. The Halls HB11 Handiburr Rethreader has the following specification: Size: M3.5 x 0.6.

The Moore & Wright MW496-01 Magnetic Snake Stand has a corrosion resistant chrome plated flex arm that will hold rigidly in almost any position. The v shaped base is perfect for mounting on rounded surfaces. There is a powerful magnetic base that can be turned on and off depending on the user requirements and the magnetic force is equal to 40kg/85lbs.

These Forgefix high-low thread Concrete Frame Screws are Zinc Yellow Passivated for increased resistance to corrosion. They offer a virtually stress free fixing, allowing close to edge applications. They are through-fixing, eliminating the need for marking and re-positioning when fixing batons etc. The Torx compatible head of the screw enables increased torque control. APPLICATION: Extremely popular fixing for window and door frames. Also now used as a versatile fixing for many applications in DIY, Joinery, Plumbing and Electrical trades. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish, whilst having excellent resistance to corrosion. By design, Torx compatible head screws resist cam-out much better than Phillips or Slotted screws. Where Phillips heads were designed to cause the driver to cam out, to prevent over-tightening, Torx compatible heads were designed to prevent it and to achieve a desired torque consistently. Torx compatible head sizes are described using the capital letter 'T', followed by a number. A smaller number corresponds to a smaller point-to-point dimension of the screw head. Only the proper driver can drive a specific head size without risk of ruining the driver or screw. High-Low Thread screws have an excellent holding power in wood due to their alternating high and low thread heights.Concrete Frame Screw Torx High-Low Thread ZYP 7.5 x 122mm Bag 10

Stahlwille reversible, fine tooth Ratchet Insert Tool with 60 teeth. Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003. NOTE: Please pay attention to insert size required - 9 x 12 or 14 x 18.CAUTION: A modified torque setting is required if using the size 40HD. MADE IN GERMANY.Stahlwille Ratchet Insert Tool. Size: 9 x 12mm.Drive: 3/8 in.

The Stabila BST-K Construction Tripods have a removable head that allows quick and easy mounting of the laser, simply remove and head and attach onto your laser before fastening the head onto the tripod. The lifting system with crank handle allows the height of the laser to be raised and locked off at a range of heights. The built-in air cushion lifting system allows the central column to descend gently, even if the user forgets to lock off the tripod. This prevents accidental damage to the laser. Each leg of the tripod can be adjusted individually and each spiked foot has rotatable rubber shoes, for scratch-free use indoors. Also fitted with a high quality chain spread stopper.The Stabila BST-K-L Column Construction Tripod extends between 98-220cm in height.

Listing Date:03/29/2023