The Weller 18 Volt WHS40 Temperature Controlled Solder Iron has a temperature range of 200 - 450°C and eliminates the risk of heat spikes commonly associated with stations without temperature control. Equipped with an 18 Volt low voltage iron with an ergonomic handle, allowing the user to comfortably get closer to the job at hand. Specification Input Power: 18 Volt.Temperature: 200-450°C.Tip: T0054321199, S32 Solid Longlife Tip 2.mm, SI15/SPI16.Weight: 1.48kg.
Stabila 196-2E Electronic Level with IP65 protection against water and dust. This professional quality level with electronic inclinometer is ideal for carpenters, joiners, kitchen builders, metalworkers, formworkers, construction engineers, pipe fitters and many more.The Electronic inclinometer has a dual display for accurate easy reading of inclinations in all positions. A second display located in the upper surface for easier reading of the measured value. With angle indication in degrees, percentage, mm/m, in/ft. Accoustic signal for horizontal and vertical measuring, audible inclination guide with three different signal tones allowing the user to arrange elements without having to look at the spirit level. With automatic switch off can be selected after 10min or 2 hours. As a spirit level it has extra long ribbed profile providing a high resistance to deformation during everyday use on site and a permanently moulded precision vials for overhead reading - no readjustment required. It has removeable endcaps for measuring flush into corners, a special coating to protect level against dirt and ruberised handholes for easier handling. Measuring accuracy of electronic module @ 0° and 90° 0.05° @ 1° and 89° 0.2° Measuring accuracy of spirit level: in normal position: 0.029° = 0.5mm/m, and in upside down position 0.029° = 0.5mm/m. Protection Class: IP65.Stabila 196-2 Electronic Spirit Level. Length: 600mm (24 in).
The two handle arrangement provides good balance and control, it can also be used single handedly. It's powerful 1,010 Watt motor gives fast, efficient removal of material in a variety of applications. The integrated dust container provides efficient dust collection, the sander is also AirLock compatible. The top exit cordset keeps the cable away from belt area preventing interference with sanding operations. Supplied with a dust container.
