The Faithfull FAISCYTHETTE Scythette is ideal for cutting through long grass and weeds.It has a 95cm (37in) long tubular steel handle with soft-grip.For best performance it is recommended that the blade is regularly sharpened. Overall blade width: 305mm (12in). Replacement blade available (FAI GRASSHRB).
The Union 2295 2 Lever mortice sashlocks are ideal for timber doors hinged on the left or right and they keys are suitable for doors up to 54mm thick. The deadbolt is locked or unlocked by the key from either side with the latch bolt (which is reversible) withdrawn by lever handle from either side.These locks have a two-way action, suitable for lightweight knobs or sprung handles. These locks have a 11mm aluminium deadbolt, a brass reversible latch bolt and the striking plate is finished to match the forend. Supplied with 2 steel nickel plated keysKeying 20 standard differs (numbers from M21H to M40H) A deadlock has a single deadbolt which is locked or unlocked and locked by means of a key from either side, whereas, a sashlock has both a deadbolt and a latch which is operated from either side by a lever handles. The security level of mortice deadlocks or sashlocks ranges from 2-5 levers. The higher the number of levers the more secure the lock is.Forend Finish: Brass Finish (Striking Plate Security box type, finished to match forend)Case Size: 76mm x 102mm (3in)Backset: 57mm This is the measurement from the edge of the door to the centre of the keyhole.Centre: 57mm This is the measurement from the centre of the follower, which operates the handles, to the centre of the keyhole. In the UK this is commonly 57mm.Pack: Visi
A modern tubular alloy pull handle for bolt through fitting to doors which don't require a mortice latch.Supplied with screws and fitting instructions.Fitting Instructions:1: Mark a vertical line on door face approx 75mm from door face on the side of door to which the handle will be installed.2. Measure 2 points on this line for fixing holes dependant on handle size (either 225mm or 300mm apart).3. Use a 8mm drillbit to drill the two fixing holes from the handle side of the door ensuring they are square to the door surface.4. insert the two supplied bolts into the drilled holes from the opposite side and fasten into the handle profile.Length: 300mm.
