Hama - Befestigungskit - Schwarz (00088419)

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

Tipo:Xenon HID; Potencia (W):55; Color temperatura:15000K; Luz:Combo; Potencia de Salida de Balastro (W):55; Soporte de Lámpara:H13; Color de la Luz:Azul; Dimensiones de Unidad / L x A x L (cm):12115; Peso Neto (kg):0.185; Qué hay en la caja:x Bombilla HID XENON; Función:Linterna de Cabeza; Material:" PCB agua de plástico resistente cubierta de epoxy,Plástico,vidrio,ABS; Características:A Prueba de Viento,Impermeable,CANBUS,De Alto Rendimiento; Voltaje de Entrada:12 ~ 24V,12V,CC; Para:Coche

Kemo Marderschutz Ultraschall wasserdicht mit Hochspannungsplättchen M176 (M176)

Subsonic mating rituals are an ICON specialty. Dump clutch, loft the front, and stick those tail feathers out for all the world to see. The Airmada Opacity is an eye-spotted, feather-ruffling, cryptically-colored shot across the bow. And if that front wheel comes up too high during your impressive show of peacock size, just hit the brakes and they’ll fly right by. World Standard Meets DOT FMVSS 218 (US), ECE 22-05 (Europe), SAI AS1698:2006 (Australia) & PSC (Japan) Helmet Safety Standards. Shield Fog-Free Icon Optics™ shield with Rapid-Release™ system and ProLock™ positive shield locking system. Also fits Icon Tracshield™ with tear-off posts. Liner Sublimated Hydradry™ moisture wicking liner. Shell Injection molded polycarbonate shell for strength and durability. Long oval fit The head is long front-to-back and is narrow side-to-side. This shape offers additional forehead room for those who find that most helmets have pressure points in the forehead. Venting 6 air intakes and 4 exhaust ports combined with deep channeling in the interior energy absorbing EPS foam keeps your head cool, reducing rider fatigue. Light weight A reduced shell profile helps reduce overall weight, while maintaining the the exclusive World Standard of ICON to suit your riding style. Exterior The Airmada fits extremely close to the head by virtue of its low profile shell. Additionally, the Airmada features a recessed twin-channel supervent with integrated spoiler to reduce helmet buffeting at high speeds. Shield The Rapid release shield removal system allows you to swap the fog-free Icon Optics shield in the blink of an eye. This cutting-edge system allows you to select the right shield for the conditions, all of which produce unrivaled distortion-free line of sight for what lies ahead. Interior The energy absorbing EPS foam liner uses our rider-preferred longer oval head form for a personalized fit without wasting an ounce of space. Combine that with superior venting, removable breath deflector, and a washable Hydradry moisture wicking interior creates a nearly perfect rider-focused enclosure. Once on you may never want to take it off. Icon Optics shield Designed to fit Airframe Pro and Airmada helmets. The IconOptics™ shield is fitted with a helmet shield lock to keep your shield securely closed. Sideplates (sold separately) mount to each side of the IconOptics shield for a more custom, finished look. Icon Tracshield The flat Icon TracShield™ is available for the Airmada as a factory solution for riders who require tear-offs. Compatible with our Rapid Release™ shield change mechanism, the TracShield™ can be used on the Airframe Pro and Airmada helmets, and is available in Dark Smoke, Clear, Yellow, and RST Silver. Tear-offs are available separately.

Kurzinfo: Hama Prime Line - Netzteil - 24 Watt - 4.8 A - 2 Ausgabeanschlussstellen (USB (nur Strom)) - Schwarz Gruppe Netzgeräte & Batterien/Akkus Hersteller Hama Hersteller Art. Nr. 00173608 Modell Prime Line EAN/UPC 4047443309815 Produktbeschreibung: Hama Prime Line Netzteil Produkttyp Netzteil Ausgangsanschlusstyp USB (nur Strom) Erforderliche Netzspannung Wechselstrom 100-240 V Ausführliche Details Allgemein Produkttyp Netzteil Farbe Schwarz Stromversorgungsgerät Erforderliche Netzspannung Wechselstrom 100-240 V Eingangsanschlüsse Eurostecker (Spannungsversorgung CEE 7/16) Eingangsstecker Menge 1 Ausgabeanschlussstellen Gesamt 2: 4-poliger USB Typ A (nur Strom) Gestellte Leistung 24 Watt Elektrischer Strom max. 4.8 A Ausgabedetails 2 x 4-polig USB Typ A (nur Stromversorgung) - 2.4 A Merkmale Kurzschlussschutz, Überladungsschutz, Schutzhülle

The Tactic glove is modeled after military gloves for use with tactical weapons. Design, suppleness and comfort with top protection, but the biker code remains intact. Outer material
goatskin Neoprene. Spandex
Protectors
Top poron reinforcement Numerous rubber reinforcements Palm reinforcement
Comfort
Adjustment on the wrist Short cuffs. Solid lining made of polyester