Rawlplug Brown Uno Plugs Pack of 1000 7mm x 30mm

The Stanley Hobby paint brush has pure black bristles and a rust resistant ferrule. The yellow polypropylene handle is shaped for comfort.This Stanley Hobby Paint Brush Set contains everything you need in 1 complete set of pure bristle paint brushes. You can get all the odd jobs around the house done in no time with this set, from the smallest 12mm (1/2in) for around window frames, dado rails etc. to the largest 75mm (3in) for doors, small wall areas or cupboard doors giving them a new lease of life. Contains: 2 x 12mm (1/2in) Brushes2 x 25mm (1in) Brushes3 x 38mm (1.1/2in) Brushes2 x 50mm (2in) Brushes1 x 75mm (3in) Brush

Meterk Wire Crimper Profesional Ingeniería terminales del trinquete Alicates JX-02C 0.25-2.5mm2 Terminales aislados o código de color nidos AWG24-14

Listing Date:04/06/2023

The ALM Manufacturing Chainsaw Chain Oil contains a unique formula of modern extreme pressure additives that provide superb lubrication, reduced chain and bar wear and improved fuel economy. Blended and bottled in the UK. Size: 1 litre.

The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.

Disston Screwdiggers fulfil the same function as Screwsinks but the countersinking part can be slid up and down the drill part of the tool.Ideal for drilling, countersinking and counterboring in one operation.This means that a No.8 Screwdigger can be adjusted to predrill for different lengths of No. 8 Screw.Uses 7/64in Drill Bit.To ensure an acurate fit we suggest you use the same Plug Cutter from the Disston brand.For No 8 screw