Marine Gear Shift Lever 2 Stroke Boat For Yamaha 9.9HP 15HP 18HP Outboard

TPU Remote Smart Key Cover Fob Case Shell For Mazda 2 3 4 6 CX-3 CX-5 CX-7 MX5Description:Color: Blue,Gold,Silver,Red,Pink,BlackMaterial: TPUSize:8*2.8*1.5 cmFeature:1.Fashion appearance,provide eye-catching show off and personalize your smart key2.With ultra-high comfort,feel smooth3.Protect your case shell from scratchingCompatible:For 2009-2017 Mazda 2For 2009-up Mazda 3For 2009-2015 Mazda 5For 2009-up Mazda 6For 2016-up Mazda CX-3For 2009-up Mazda CX-5For 2009-2012 Mazda CX-7For 2009-up Mazda CX-9For 2009-up Mazda MX-5 MiataNote:1.We provide clear pictures, measurements as possible.2.The color of the actual items may slightly different due to different computer screen, thanks for your understanding.Package included:1* TPU key shell cover

Features
cowhide leather straps strap closure with practical click buckle with stainless decorative studs

Boasting EN certification and constructed of flexible expanded nitrile rubber, the Pro-Armor Lumbar is extremely comfortable while still offering excellent lower-back protection. Ergonomics
Dynamic thickness Anatomical shape Adjustable lumbar band Longitudinal bending
Main Materials
Expanded nitrile rubber
Performance Shock
Lumbar protector certified to EN 1621.2/2014 lev. 1 Funcional pattern
Temperature
Perforated structure

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Specification:Product name: Turn Signal Indicator AdapterMaterial: PlasticColor: BlackDimension: 52.5x35mmSuitable for the installation of all kinds of converted steering lights, Indicator Light AdaptersFitment:For KAWASAKI Z250 Z300 Z650 Z750 Z800 Z900 Z1000 Z1000SX Z750S Z250SLFor KAWASAKI NINJA1000 NINJA650 NINJA650R NINJA250R NINJA300RFor KAWASAKI KLE Versys 1000 KLE Versys 650 VERSYS-X 300For KAWASAKI ER6N ER6F ZRX1200 KLE 500 KLR 650For KAWASAKI ZX6R ZX10R 2008-2017The Compatibility Is Just For Reference. Please Compare With Your Original One Before Purchasing!Note:1.We provide clear pictures, measurements where possible.Please check as much as possible to make sure the item is the one that you need.2.Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)Package Included:4 X Turn Signal Indicator Adapter

Collar and reverTwo jetted pockets55% polyester/45% woolDry clean onlySizes 36 - 50ins