Boho Dream Catcher Handmade Gift Wall Hanging Decor Art Ornament Craft Feather 5 Circle 7520cm for Kids Bedroom Wedding Festival Lightinthebox

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S

A professional bi-hexagon, AF socket produced in accordance with ISO 9000 and AS5954 specifications for increased torque and reduced risk of rounding fasteners.Manufactured from chrome vanadium steel with a satin finish.1/2 in square drive.Size 1 3/16 AFLength 43mm

Teng Tools impact sockets are specifically designed for use with power tools and air tools. Manufactured in chrome molybdenum in accordance with GGG-W-6608, these sockets ensure the highest quality. They are size marked for easy identification. These regular 6-point deep impact sockets have a 1/2 inch square drive. They are manufactured to the latest DIN standard for industrial use.The TEN920617 Impact Socket has the following specifications:Size: 17mm. Length: 78mm.

The Faithfull set of two spokeshaves, 1 concave and 1 convex, made with malleable iron bodies. A concave spokeshave is ideal for shaping spindles, oars, chair and table legs. A convex spokeshave is used for recessed work. Cutter Width: 50mm. Length: 240mm.

The Henry Squire HLS50S High Security Lockset with an integral lock and pivoting hasp providing formidable resistance against attack and corrosion. It provides an integrated solution for securing vans, gates, doors, garages and other high risk areas. The lock body is made from solid hardened steel and the hasp is made of a special cast material. Hardened boron alloy steel shackle - fully protected. 6-pin tumbler mechanism giving over 250,000 key differs. Rekeyable. CEN Graded. Available keyed alike and master keyed. Available keyed alike and master keyed. CRIMESTOPPERS supported. Lock Body: 50.0mm.Lock Body Thickness: 26.0mm.Shackle Diameter: 10.0mm. Hasp Length: 150mm.Hasp Width: 68mm.Hasp Thickness: 16.0mm.

High leverage compound cutting action snips made from forged alloy steel. Chrome Molybdenum construction with serrated cutting edge to prevent slippage when cutting. The one handed automatic latch releases with the squeeze of the handles which are bi-material for extra comfort and grip. These snips cut up to 18 gauge steel and are suitable for cutting aluminium, sheet uPVC, wire mesh, leather, copper and plastic. Size: 250mm (10in).1 x Stanley ;Yellow Aviation Snip Straight Cut 250mm (10in)