Free
Support
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety SHELL in TRICARBOCO material, mix of Kevlar, carbon and fiber, joint through resine, hand made, using new technologies with vinilester resin. The INTERNAL POLYSTYRENE produced in 3 sizes to get the best fitting. This characteristic allows a gradual and progressive absorption of the energy produced by the impact. Even if the bigger part of the energy created by the impact is absorbed by the external shell, thanks to its deformation, the role of polystyrene is determinant for the absorption of the residual energy. A diversified density of the polystyrene, permit us to optimize the mechanical performance of the shell/polystyrene. The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Ventilation The internal polystyrene has been studied to work together wityh the air ventilations, put on the shell. The channels allow the perfect inside air flow and at the same time a quick outside air flow from back ventilation. Comfort The CHEEK PADS and the INTERNAL COMFORT shell can be removed, washed and replaced.
They are made of a precious fabric with specific fibers, that offer:
It moves away the body sweat, Keeps rider fresh, dry and completely comfortable, Lightweight, soft and breathable fabric, Performance controlled and certified by ADVANSA.
The cheek pads are easily removable also in case of accident through a red strap which removes the cheek pad even if the helmet is worn by the rider.
Schutz mit technischem Know-How! Die Fußballhose Nike Dry Academy 19 Woven Pant bietet schweißableitenden Schutz und überzeugt durch eine bewegungsfreundliche, schmal zulaufende Passform. Reißverschlüsse an den Knöcheln ermöglichen einfaches An- und Ausziehen. Größenauswahl-Hilfe: Model mit 190 cm Größe und 90 kg Gewicht trägt Größe LGrößenauswahl-Hilfe: Model mit 180 cm Größe und 74 kg Gewicht trägt Größe MGrößenauswahl-Hilfe: Model mit 173 cm Größe und 60 kg Gewicht trägt Größe SEigenschaften: Material: 100% PolyesterPflegehinweise: Waschmaschinenfest, keinen Weichspüler benutzen Passform: Locker geschnitten, unten enger zulaufendLeibhöhe: NormalDas Nike Dry-Material Dri-FIT hält Dich trocken und sorgt für Tragekomfort: Schneller Feuchtigkeitstransport nach außen. Hält den Körper angenehm trocken. Das Dri-FIT Funktionsmaterial sorgt für raschen Feuchtigkeitstransport von Ihrer Haut zur Gewebeoberfläche zur Verdunstung und hält so Ihren Körper angenehm trocken Mesh-Einsatz an beiden Seiten im oberen Bereich sorgt für bessere AtmungsaktivitätElastischer Bund mit Kordelzug innen für die perfekte verstellbare PassformSeitliche Reißverschlusstaschen bieten sichere Aufbewahrungsmöglichkeiten: An beiden Seiten befindet sich jeweils eine Reißverschluss an den Beinenden für leichtes An- und Ausziehen beim Tragen von Fußballschuhen Die Cut-and-Sew-Seitenstreifen sorgen für einen sportlichen Fußball-LookSwoosh Logo als Outline vorn links aufgestickt
Welcome to Our Store! We Are Offering High Quality Products with Reasonable Wholesale Price. All Products Are Supply from Factory Directly. Excellent Service and Fast Shipping.
Molten liefert den offiziellen Spielball für die UEFA Europa League 2018-19 Gruppenphase! Die Molten Corporation (Hauptsitz: Hiroshima, Japan; Präsident: Kiyo Tamiaki), Hersteller von Sportbällen und Ausrüstung in Wettbewerbsqualität, wird den exklusiv für die Gruppenphase der UEFA Europa League entworfenen Spielball liefern, welche vom 20. September bis zum 13. Dezember 2018 stattfindet. Dies geschieht auf der Grundlage des Abkommens zwischen Molten und der Union der europäischen Fußballverbände (UEFA) und es wird der erste von Molten für die UEFA Europa League gelieferte offizielle Spielball sein. Der offizielle Spielball Molten UEFA Europa League 2018/19 OMB wurde an Moltens Topmodell, dem Vantaggio 5000, angelehnt. Moltens einzigartige thermische Klebetechnologie verbessert die Formbeständigkeit und minimiert Wasserabsorption, was zu außerordentlichen Spieleigenschaften, unabhängig von den äußeren Bedingungen führt. Die ´Dimples´ auf der Oberfläche verringern die im Flug entstehenden Turbulenzen um den Ball herum und optimieren somit die Ballkontrolle. Unter besonderer Berücksichtigung der UEFA-Markenidentität kreierte Molten ein exklusives Design für den offiziellen Spielball dieses Wettkampfs. Molten wird weiterhin Fußballerzeugnisse von hervorragender Qualität und ausgezeichnetem Design entwickeln und an Spieler aller Klassen liefern, um das Markenversprechen ´For the real game (Für das wirkliche Spiel)´ zu erfüllen.Eigenschaften: Obermaterial: PU-LederKontsruktion: AcentecOffizielle Anerkennung: FIFA-Qualität PRO - Sämtliche Tests werden von neutraler Stelle gemäß den Regeln der FIFA durgeführt. Die Tests umfassen Umfang, Rundung, Rücksprung, Wasseraufnahme, Gewicht, Druckverlust und - speziell für FIFA Quality Pro - Form und RundungsbeständigkeitÜberragende SpieleigenschaftenACENTEC-Struktur: Moltens einzigartige thermische Klebetechnologie erzeugt eine glatte, nahtlose Oberfläche, was durch Nähen von Hand nicht erreicht werden kann. Das Ergebnis ist eine einheitliche Oberfläche mit verringerter Wasserabsorption, wodurch außerordentliche Spieleigenschaften ohne Beeinflussung durch die Wetterbedingungen sichergestellt werdenEine Oberfläche, welche die Flugstabilität verbessert: Die ´Dimples´ auf der Oberfläche verringern die im Flug entstehenden Turbulenzen um den Ball herum und optimieren somit die Ballkontrolle. Dies führt zu genaueren Ballabgaben und SchüssenExklusives Design für die Europa League: Die Markenidentität der ´Energiewelle´ der UEFA Europa League repräsentiert die Reisen der Klubs durch Europa und drückt das Auf und Ab des spannenden Abenteuers aus. Die Energiewelle ist in Moltens Balldesign integriert worden, um ein einzigartiges und exklusives Produkt zu kreieren und um die visuelle Erkennbarkeit zu erhöhenMolten Logo aufgedruckt ´Official Match Ball of the UEFA Europa League´ Schriftzug auf dem Ball aufgedruckt UEFA Europa League Logo aufgedruckt Wird in hochwertiger Präsentationsbox geliefert Über Molten: Molten, ein Hersteller von Bällen und Sportausrüstung befasst sich seit 1958 mit der Herstellung und Vermarktung von Basketbällen, Volleybällen, Fußbällen und Handbällen kompromissloser Qualität. Molten steigert weiterhin globale Maßstäbe und liefert die offiziellen Spielbälle und Sportausrüstung für größere Wettkampfklassen, Mannschaften und internationale Wettkämpfe in der ganzen Welt.
Features
Lightweight, breathable and stretchy polyester back ensures maximum comfort and performance Ergonomically shaped fingers for an ergonomic fit Non-slip special trim on the fingers and palm for extra grip and lever control High quality sublimation prints Adjustable Velcro closure on the wrist for a secure fit Single-layer, perforated Clarino® palm for improved grip and airflow
Anatomically optimized and incorporating class-leading protective features into a multi-material chassis, the SP-X Jacket has extensive stretch panels for a close, sport riding fit while offering high levels of upper body mobility regardless of the riding position. Perforation zones and zippered air intakes on the torso provide internal airflow while a removable thermal liner means this certified jacket can be worn in cooler climates. Construction
Main chassis multi-material, multi-panel construction featuring 1.3 mm high grade bovine leather and highly abrasion stretch fabric Extensive stretch fabric panels on sleeves and chest further improve fit and upper body movement D-ring and hook and loop grip waist adjustment for personalized riding fit and safe closure Two front zippered hand pockets plus inner waterproof wallet pocket Zippered air intake vents are positioned for optimized airflow adjustable to a riderâs personal tastes Strategically positioned localized perforations for excellent ventilation and internal airflow Low profile collar construction with microfiber comfort edging plus 3D textured fabric inner collar lining for comfort Pre-curved sleeve construction reduces fatigue when riding and improves comfort
Protection
Chest pad and back compartments with PE padding (Alpinestars Nucleon chest and back inserts available as accessory upgrade) Multiple snap button system to integrate the Level 2 certified Alpinestars Nucleon back protector Internal certified Bio-Armor shoulder and elbow protectors Newly developed shoulder protection features over-molded advanced TPU guard layered under the outer fabric for optimized levels of protection and comfort This garment is certified 89/686/EEC
Features
Removable thermal liner (80g on body, 60 on sleeves) means jacket can be worn in cooler climates Soft, microfiber comfort edge on collar and cuffs Internal waist connection zipper allows attachment to Alpinestars riding pants Reflective detailing improves visibility of rider
