Free
Support
Heller HSS Metall-Spiralbohrer 8.4 mm 18524 0 Gesamtlänge 117 mm rollgewalzt DIN 338 Zylinderschaft 10 St. (18524 0)
These Forgefix ForgeFast Wood Screws have a universally accepted, Pozi compatible drive. They have 6 underhead lobes for improved countersinking and reduced surface dust, and reinforced countersunk necks which improve holding power. The screws have an anti-friction thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber and improved drawing strength. The thread is serrated for improved pull-out and reduced torque when inserting the screw. The double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel. The screws have a 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use.Size: 4.5 x 70 mm.Box quantity: 100.
98% bacterial filtration efficiencyIdeal for dry surgery when there is no risk of splashes60 masks per packConforms to EN14683:2005 type II
Beschreibung Zykon-Bolzenanker Hinterschnittanker für die Vorsteck- (Bolzenversion FZA und Innengewindeanker FZA-I) und Durchsteckmontage (Bolzenversion FZA-D). Mit dem FZUB-Bohrer wird ein zylindrisch-konisches Bohrloch mit Hinterschnitt in einem Arbeitsgang erstellt. Beim Setzen des Ankers wird die Ankerhülse mit einem Hammer (oder Setzgerät) über den Konus geschlagen und füllt das hinterschnittene Bohrloch formschlüssig aus. Lieferbar auch als Spezialversion FZA-ST A4 zur Verankerung von Steigeisen nach DIN V 1211 GS / 1212 GS. Ausführung FZA A4 aus nicht rostendem Stahl der Korrosionswiderstandsklasse III, z. B. A4 für Anwendungen im Außenbereich und in Feuchträumen. FZA C aus hochkorrosionsbeständigem Stahl der Korrosionswiderstandsklasse IV, z. B. 1. 4529 für Anwendungen in aggressiver Atmosphäre. Technische Daten: Inhalt: 10 St. Material: Stahl, galvanisch verzinkt Produktabmessung, Ø: 18 mm
