The DEWALT DT70548T 3in Impact Rated Bit Tip Holder comes with 3 bits that are specially designed to have an increased life, the Optimized Torsion Zone allows the bit to flex rather than break, even when used in extreme applications. The contoured area of the tip flexes with the torque of the impact driver. Includes: 1 x 25mm Phillips Bit: PH2.1 x 25mm Poziriv Bit: PZ2.1 X 25mm Torx Bit: T20.
Stahlwille Series 49 INHEX Sockets have 3/8in square drives and are suitable for socket head/hex head screws. Made from chrome alloy steel and chrome plated. Manufactured to DIN 7422 standards. Overall length: 52mm.Metric sizes. MADE IN GERMANY.Stahlwille In-Hex Socket 3/8in Drive. Size: 3mm.
The Makita 9920 Belt Sander has the following features:- Variable speed control.- Constant speed under load.- High power for stock removal.- Flat top for inverted applications.- Dust bag.- Long cable for sanding runs.- Double insulated. Technical specifications:Belt Size: 76 x 610mm.Belt Speed: 210 - 440m/min.Power rating: 1,010 watt.Vibration sanding: 2.5m/sec².Vibration K factor: 1.5m/sec².Noise sound power: 96 dB(A).Noise sound pressure : 85 dB(A).Noise K factor: 3 dB(A).Net weight: 4.5kg. Supplied with:Abrasive belt.Cork/carbon pad.Dust bag.The Makita MAK9920L Belt Sander Variable Speed uses 110 volt.
The ABUS 65 Series long shackle brass padlocks have a body which is made from solid brass, hardened steel shackle up to 30mm and hardened steel alloy shackle 40mm and above. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. They are suitable for low to medium security requirements and are also suitable where a strong requirement for service performance and longevity is required. The padlock locking is automatic, it does not require a key.Shackle produced from hardened steel. Precision pin tumbler cylinder. The cylinder can be re-keyed to match an existing key (Keyed Alike). Overall width: 40 mmOverall height: 103 mmOverall depth: 15 mm Shackle width: 22 mm I.D.Shackle height: 63 mmShackle Dia: 6 mm
Widely used in automotive, aviation, diesel and farm equipment manufacture and also in jig, fixture and gauge work. Packed individually in envelope.Metric gauge 300 mm long.Thickness: 0.03mm
