Paslode IM65 Angled 2nd Fix Nailer Li-Ion Pack

The Einhell Power-X-Change Starter Kit, contains the following: 1 x Power-X-Change 18 Volt Charger that features a 6-step charging condition display and is ready for wall-fastening. The charger uses an intelligent charging-management-system for long battery life (battery status will be constantly checked and accordant loaded, deeply discharged battery will be charged in repair mode). Input Power: 240 Volt.Output Voltage: 21 Volt.Charging Time: 1.5Ah: 30 Min, 3.0Ah: 60 Min, 5.2Ah: 130 Min. Weight: 0.5kg. 1 x Power-X-Change 18 Volt 2.0Ah Li-Ion Battery that features a 7-in-1 ABS: Active Battery Management System and a 3-Step LED battery control. The microprocessor controls key parameters like temperature, voltage and even a deeply discharged battery can be charged in repair mode which offers a long working battery life. The high quality Li-Ion battery cells provide nearly no self discharge and the rubber coated housing gives high impact protection and a high grip. It also has a recessed grip that ensures good ergonomic handling. Battery Type: Li-Ion.Voltage Supply: 18 Volt.Battery Capacity: 2,000 mAh.Product Weight: 0.4kg.

Style:Antique; Finish:Antique Brass; Faucet Type:Shower System; Number Of Handles:Two Handles; Flow Rate:1.8 GPM (6.81 L/min); Cold and Hot Switch:Yes; Valve Type:Ceramic Valve; Overall Height:1280mm (50.39); Showerhead Width:Diameter 203mm (8); Faucet center(Inches):18-21; Handshower Material:Brass; Faucet Body Material:Brass; Shower Arm Included:Yes; Handshower Included:Yes; Valve Included:Yes; Installation Holes and Handles:Two Handles Three Holes; Shipping Weight:4.389; Net Weight:4.9; Listing Date:01/20/2011; Special selected products:hot

These Forgefix Sleeve Anchors are through fixing, for ease of use and speed of installation. Their sleeve wedge cones are designed to give maximum expansion even in shallow anchoring depths. They have a reduced outside sleeve diameter compared to thread size for smaller hole sizes, offering reduced stress in base materials. The anchors are Zinc Yellow Passivated for increased resistance to corrosion and have hexagonal heads. Also known as 'Loose Bolt' sleeve anchors. APPLICATIONWidely used for fixing balustrades, handrails, racking and holding down machinery, plus many more installation applications.Ensure the correct socket drive or spanner is used to ensure accurate installation. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It provides a coating that is aesthetically pleasing, and which offers excellent resistance to corrosion. The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.Sleeve Anchor Fixing Hex Bolt M12 x 99 Bag 5

These Thor Nylon Hammers have split cast iron head with two nylon faces fastened securely to the handle with two socket head cap screws. Head design allows quick adjustment or replacement of either the handle or the faces, while the faces are designed to wear, and can be rotated for even wear.For use as a heavy-duty, multi purpose soft-faced hammer in most industries for assembly, repair and maintenance operations.Diameter: 50mm (2 in).Weight: 2100g (4 1/2 lb).

Paslode IM350+ Diamond point clipped head Nail packs with paper strip, supplied with Paslode Special Impulse gas fuel cells.FINISH: All Paslode nails are Chrome 6, cadmium and lead free and are available in five finishes to meet corrosion requirements.Bright: Economy and bright nails meet the Eurocode 5 requirements for applications in service class 1 (indoor) Specification - No coating.Galv Plus : Meet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn / Al alloy approx 15µm.Electro Galv : Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7µm.Hot Dipped Galv : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - Zinc coating minimum 50µm Stainless Steel : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - A2 according to AISI 304, and A4 according to AISI 316.SHANK: Smooth Shank: The standard nail, offering high shear value and lowest withdrawal resistance. Fixing across the grain. Fixing into end grain. Clenching applications. Specification - Number of centres will vary with shank diameter.Unilock Shank : Increases withdrawal resistance. Drives easier than ring shank fixing across the grain. Specification - The ringed parts have 24 rings per inch.Ring Shank : Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification.HEAD TYPES :Round Head : The head area is designed to maximise resistance to the head being pulled through Specification - Head size between 2.0 and 2.5 times wire diameter according to EC5Clipped Head : Increases number of nails per strip. The head area is designed to maximise resistance to the head being pulled through Specification - Head area corresponding to full round head area, according to EC5

The Moore & Wright Spring Dividers are manufactured from polished tool steel and the points are hardened to over 550Hv. The bow spring ensures uniform tension over working range and they are fitted with a centrally mounted adjustment screw. These Spring Dividers comply with BS3123 standards. Note: The nominal size is the distance between the centre of the roller and the working ends of the legs.The Moore & Wright 504 Spring Divider has the following specifications: Size: 100mm (4in).