The Faithfull FAIDOWKIT10 Dowel Kit contains the following: 1 x brad point drill bit1 x drill stop collar. 2 x dowel centre points.1 x hex key.12 x 6 mm fluted dowel pegs.
A built-in digital camera with 4x zoom is aligned to the laser measurement device and provides long range targeting, even when the laser dot is not visible. The unique combination of digital Pointfinder and 360° tilt sensor allows measurements which are not possible with conventional distance meters. The DISTO™ D510 uses Smart Horizontal Mode to calculate the correct horizontal distance, taking out the error produced from out of level measurements, allowing measuring beyond obstructions or taking indirect measurements. Bluetooth® Smart technology allows data transfer to smartphones and tablets. In addition to the smart free App Leica DISTO™ sketch, there is also a host of other Apps to allow you to work efficiently and avoid typing errors when recording measurement results. The DISTO D510 kit is also supplied with the following, in a rugged case: Leica FTA360-S adaptor: Sturdy adaptor with fine drive for convenient and precise targeting. The adaptor eases the task of targeting over long distances, and results in minimum discrepancies when taking indirect measurements. Fits all Leica DISTO™ and Lino products with a ¼ “ thread and is designed to be used in combination with the Leica TRI 70 or TRI 100 tripod. Leica TRI 70 tripod: The small portable tripod provides a stable base for more accurate measurements. It is intended for everyday use, features include easy fine adjustment and a bubble level. Extendible length from 0.40 m to 1.15 m. Ideal with the Leica TA360 or FTA360 adaptor. Distance Area & Volume calculation Plus & minus calculation Tilt Sensor (360°) Stake Out Timer Indirect Measurement Pythagoras (3 point) Tracking (incl. min/max) Memory – last 30 measurement recall
The Bahco Screwdriver for Pozidriv head screws. The double shape handle allows for optimum grip and maximum torque power. Permanent colour codes at both ends of the handle, for a quick identification of the tip. The blade tip is made from high performance alloy steel. Chrome plated and entirely hardened. Black finish tip for higher accuracy. The size and part number are laser branded on the blade for easier identification The Hexagon profile blade and bolster allow the use of a wrench for jobs that require more torque. The blade continues through the handle with no loss of hammer blow energy. Metallic cap gives protection during jobs requiring high impact. Conforms to ISO 8764. Colour coded for quick identification of tip type: Yellow: Slotted.Red: Phillips.Blue: Pozidriv.Green: Torx.Purple: Hexagon (Nutdriver).Bahco Tekno+ Through Shank Screwdriver. Pozi Tip PZ2 x 125mm.
This Facom 4 piece plier set comprises the following: Locking multi-grip pliers (181A.25CPE).Diagonal cutters (192.16CPE).Half-round nose pliers (185.20CPE).Combination pliers (187.18CPE).
The Knipex 26 21 200 bent long nose side cutters have long flat round jaws that are highly loadable, with elastic precision points with blades for hard wire diameter up to 2.2mm and medium wire diameter up to 3.2 mm. The cutting edges are separately induction hardened for durabilty and longer working life and are hardend to approximately 61HRC. The jaws are angled at 40° and are ideal for use on electronic or tight to reach areas on computers, circuitry, or motor vehicles applications. Knipex have used a good quality special tool steel material that is oil hardened. Dipped handles.The Knipex 26 22 200 bent long nose side cutters have Bi-material, 2-component handles for a more comfortable and positive grip. They have long flat round jaws that are highly loadable, with elastic precision points with blades for hard wire diameter up to 2.2mm and medium wire diameter up to 3.2 mm. The cutting edges are separately induction hardened for durabilty and longer working life and are hardend to approximately 61HRC. The jaws are angled at 40° and are ideal for use on electronic or tight to reach areas on computers, circuitry, or motor vehicles applications. Knipex have used a good quality special tool steel material that is oil hardened. Hard wire diameter: 2.2 mm.Medium wire diameter: 3.2 mm.Hardness approx. 61HRC.Length. 200 mm.
The Arctic Access Panel Range offers a simple, low cost, high quality solution to provide protected openings in ceilings and walls for access to building engineering services. The injection molded slim profile produces a lightweight solution, enabling an easy fit installation into all types of wall or ceiling construction. Made from UV stable ABS and held closed by a snap friction catch. They can be over-painted to match the surrounding surface. Can be fastened easily into position with a suitable glue.
