Stahlwille INHEX Extra long sockets have 1/2in square drive and are suitable for hexagon socket head head screws. They are manufactured from chrome alloy steel and are chrome plated. Manufactured to DIN 7422 (metric sizes). MADE IN GERMANY.Stahlwille In-Hex Socket 1/2in Drive Xtra Long. Size: 5mm.Overall length: 120mm.
These Facom 12-point OGV sockets have a 3/8 inch drive to fit 3/8 inch ratchets. They are high quality and ideal for tightening and loosening bolts, nuts and other fasteners.The sockets are available in a range metric sizes.Performance: conforms to ISO 2725-1, DIN 3124 and NF ISO 2725-1.The FCMJ17 socket has the following specifications:Socket size: 17mm.Length: 30mm.Weight: 52g.
The Forgefix Nyloc Hexagonal Nuts incorporates a nylon component to effectively lock the nut into position on the bolt. The nylon component has a smaller inside diameter than the actual nut. This locks the nut in place by squeezing the nylon firmly around the bolt when tightened. Unlike a standard locking washer, the Nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened. The nuts are zinc-plated for increased resistance to corrosion. Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so. APPLICATION: Where a permanent fastening is required and loosening must be prevented by movement or vibration. Can be used on most bolt products including HT Bolts, Carriage Bolts, Threaded Rod etc. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.Nyloc Nuts & Washers Zinc Plated M4 Forge Pack 50
The Bahco S4RM ratcheting spanners are made from top quality forged steel, nickel which is then chrome-plated in a matt-finish for a smooth and secure grip. Easy to use, these spanners simply grip the nut or bolt being removed or replaced, the ratcheting spanner heads are sized either side of each spanner for the desired size of nut or bolt, then just push the direction lever to remove or replace the nut or bolt with ratchet action. They are an ideal option for motor mechanics, motor cycle repairs etc., as these spanners can be used in awkward places and minimal movement action is required to use them.This ratcheting set comprises 3 spanners covering 12 sizes is supplied in a fabric carry case with belt loop for easy transportation and storage. Sizes: 8 x 9 x 10 x 11mm, 12 x 13 x 14 x 15mm and 16 x 17 x 18 x 19mm.
These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work, and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.Length (A): 125mm (5 in). Blade length (B): 16mm (0.63 in). Head width (C): 16mm (0.63 in). Head depth (D): 8mm (0.31 in). Tip width: (F): 1.6mm (0.06 in). Cutting capacity: 0.4-2.0mm. Cutting edge: Micro-bevel. The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.
