Dainese Trailknit, protector shirt

ENERGY MODE PACK! Für Dich zählt High-Speed auf und abseits des Platzes. Ultimative Geschwindigkeit auf dem Spielfeld, ultimativer Style auf der Straße. Der adidas X Tango 18.1 Boost TR kommt mit dem unverwechselbaren Look der Modelle, die auf dem Fußballplatz zu Hause sind. Er hat ein dünnes, atmungsaktives Obermaterial aus Mesh und gibt Dir mit seiner reaktionsfreudigen Dämpfung bei jedem Schritt Energie zurück.Nur begrenzte Stückzahlen verfügbar. Abgabe nur in handelsüblichen Mengen!ENERGY MODE PACK: Kreative Farben für die ultimative Bühne des großen Fußballturniers im Sommer 2018!Eigenschaften: Obermaterial: Textil und MeshInnenmaterial: MicrofaserMaterial Decksohle: Schaum mit Microfaser-Oberfläche Material Laufsohle: GummiVerschluss: SchnürungPassform: Normal geschnittenAtmungsaktiver Komfort: Das unbeschichtete Obermaterial aus feinem Mesh ist atmungsaktiv und ultrabequemUnverwechselbares Design: Der typische Clawcollar Schaft zeigt sich in einer Streetwear-VersionSockenähnliches Material und einteilige Konstruktion passt sich dem Fuß an wie eine zweite HautKomfortables Mikrofaserfutter an der Ferse mit Polsterung für ein superweiches Tragegefühl 3D-vorgeformter Fersenbereich mit ergonomischem Innenpolster für überragenden TragekomfortReaktionsfreudige Dämpfung: Eine durchgehende BOOST™ Zwischensohle bietet Energy Return mit jedem Schritt: Boost ist die reaktionsfreudigste Dämpfung, die adidas je hatte. Je mehr Du gibst, desto mehr Energie bekommst Du zurückGummiaußensohle mit Perforationen, die für Leichtigkeit sorgen

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety SHELL in TRICARBOCO material, mix of Kevlar, carbon and fiber, joint through resine, hand made, using new technologies with vinilester resin. The INTERNAL POLYSTYRENE produced in 3 sizes to get the best fitting. This characteristic allows a gradual and progressive absorption of the energy produced by the impact. Even if the bigger part of the energy created by the impact is absorbed by the external shell, thanks to its deformation, the role of polystyrene is determinant for the absorption of the residual energy. A diversified density of the polystyrene, permit us to optimize the mechanical performance of the shell/polystyrene. The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Ventilation The internal polystyrene has been studied to work together wityh the air ventilations, put on the shell. The channels allow the perfect inside air flow and at the same time a quick outside air flow from back ventilation. Comfort The CHEEK PADS and the INTERNAL COMFORT shell can be removed, washed and replaced.
They are made of a precious fabric with specific fibers, that offer:
It moves away the body sweat, Keeps rider fresh, dry and completely comfortable, Lightweight, soft and breathable fabric, Performance controlled and certified by ADVANSA.
The cheek pads are easily removable also in case of accident through a red strap which removes the cheek pad even if the helmet is worn by the rider.

mix order accept 100% brand new jerseys,include name ,number and logos. you can feel to contact me to get more info. you need.we hope to establish a long -term business relationship with you.

Features
Military pants Adjustable waist High rise Drawstring at the end of the leg Large pockets

The Rivex Chain Rivet Extrator is a strong alloy, cast rivet extractor suitable for most types of chains including IG, UG, HG and standard chains.The Rivex features detachable handles which allow it to be stored simply and easily, a heavy-duty anvil that actively takes pressure off of the chain, a one piece spindle that ensures easy release from the chain and a unique system that stops the rivet from being pushed out of the last link plate.

Our company have steady in stock on many soccer jerseys and we can offer reasonable price. Top quality .offer the embroidery logo and the original number . also can do the personal name and number US size S M L and XL . top quality .