These Faithfull fluted dowel pegs are made from air dried beechwood. They are used for making secure joints between pieces of wood or board.The Faithfull FAIDOW8150T fluted wood dowels comes in a tub of 150 with the following dimensions:Size: 40 x 8mm.
BO6050 is a 150mm (6”) Random Orbit Sander developed as the successor to the current model BO6040. User Benefits: Random orbit mode for finish sanding and buffing. Roto-orbit mode for coarse sanding and polishing. Variable speed control. Soft start. Constant speed control. Pad brake. Ergonomically designed high comfort grip. Slim skirt provides higher work efficiency in tight spaces e.g. car door handle. Side handle for operator control. Hook and loop type abrasive paper can be used. Specification: Strokes per Minute: 3,200 – 13,600/spm Abrasive Disc: 150mm Noise Sound Pressure: 82 dB(A) Noise Sound Power: 93 dB(A) Noise K Factor: 3 dB(A) Input Wattage: 750W Orbits per Minute: 1,600 - 6,800/opm Orbit Diameter: 5.5mm Pad Size: 150 mm Vibration K Factor: 1.5 m/sec² Vibration: Sanding 5 m/sec², Polishing 3 m/sec² Net Weight: 2.6kg This product also comes supplied with: 1 x MakPac Type-3 Connector Case 1 x Inner Tray 1 x Dust Nozzle 1 x Abrasive Disc
The Forgefix Nyloc Hexagonal Nuts incorporates a nylon component to effectively lock the nut into position on the bolt. The nylon component has a smaller inside diameter than the actual nut. This locks the nut in place by squeezing the nylon firmly around the bolt when tightened. Unlike a standard locking washer, the Nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning when tightened. The nuts are zinc-plated for increased resistance to corrosion. Their hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so. APPLICATION: Where a permanent fastening is required and loosening must be prevented by movement or vibration. Can be used on most bolt products including HT Bolts, Carriage Bolts, Threaded Rod etc. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.Nyloc Nuts & Washers Zinc Plated M4 Forge Pack 50
