The Chicane has been specially developed for the Supermoto fanatics among us! The glove is completely derived from the racing gloves that Macna uses in the MotoGP and WorldSBK. In cooperation with drivers, the safety level of the glove has been raised to a higher level! The glove is packed with features to protect your hands as soon as you make a low or highsider, but they are still flexible enough to feel the handles and to counter the armpump in off-road. This means you always have the engine in optimal control! Safety That s a mustache with its Carbon knuckle protection, R.I.S.C. finger and palm protector! In addition, the glove is made of different materials such as goat, beef and Neoprene for extra abrasion resistance, weight saving and flexibility. Features Made from goatskin, cow leather and Neoprene Reverse Bemberg for extra safety and comfort R.I.S.C. finger and palm protector offers extra protection with a glide Ergonomic thumb - the leather of thumb and forefinger consist of a whole for more comfort
Specification:Color: BlackUsage: Steering wheelSurface finish: Carbon fiberInstallation Mathod: Adhesive tapeCar model: For Toyota CHR 2016-2019Material: Acrylonitrile Butadiene StyreneFeatures:- Easy installation, only paste with adhesive.- Perfect to match the car model, strong practical and ornamental value.- It can play a certain protection function, such as dust, wear and scrape prevention.- Using ABS material and carbon fiber to make appearance smooth and attractive with unique texture.Package Included: 1 X Steering wheel trim
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric. Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor. The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part. Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER: Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. Removeable Nose Protector Ventilation The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation. Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.
Features Double spoiler with incorporated air extractors: optimization of the aerodynamic trail and internal cooling "SHARK skin" peak side fastenings: passive reduction of aerodynamic noise Autoseal system: flattens the visor onto the helmet, offers better soundproofing and seals the helmet (against water and cold) Constructed from multiaxial glass fiber Integrated UV380 lable & anti-scratch sun visor Anti-scratch visor Prepared for Pinlock Max Vision Double D-ring strap Quick release visor system Optimal comfort for the persons wearing glasses Planned location for SHARKTOOTH® 1390g
