Teng MB442 Megabite 8in Heavy-Duty Side Cut Pliers

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S

IRWIN Record Hinged Pipe Vices are guaranteed against breakage with exceptional strength in load bearing areas. Single V-jaw in frame moves between two V-jaws in base to hold even the smallest pipe sizes securely. Self locking frame is reversible for right or left-hand operation. Replaceable Steel Jaws and can be fitted to bench and or stand.IRWIN Record 92.1/2C Hinged Pipe Vice. Pipe Capacity: 3 - 60mm (1/8 - 2.1/2in).

Abrazadera de soldadura vertical Práctica popular Manija de liberación rápida Vertical Toggle Clamp GH-12132

BUSCADOR Profesional Puncher de cuero giratorio alicates Ojalero Puncher Heavy Duty Agujero redondo Herramienta de perforación para la correa de cuero Reloj Correa de banda Zapato Tarjeta de papel

The Makita DHP459 features: Compact design with an overall length of only 192mm. Single sleeve keyless chuck allows for easy bit installation/removal by one hand. LED Job light with pre-glow function. BLDC motor specially designed to provide, above all, more work amount on a single full battery charge.

Rustins Danish oil gives an oil finish, suitable for all types of wood. It differs from Teak Oil in that it contains special ingredients, which prevent it drying to a gloss. It is an easy to use wipe on finish, which brings out the beauty of the timber and gives a natural, open grained, soft lustrous finish. Ideal for all woods and is excellent on turned woodwork. Conforms to The Articles in Contact with Food Regulations. Also Conforms to the Toys (Safety) Regulations 1995, BS:EN71 Part 3, which makes it ideal to use on children's toys. Danish Oil is a unique formulation developed by Rustins.Rustins Danish Oil.Size: 5 Litre.